UPD70F3713GC-8BS-A Renesas Electronics America, UPD70F3713GC-8BS-A Datasheet - Page 168

• Manufacturer Part Number: UPD70F3713GC-8BS-A
• Description: MCU 32BIT V850ES/LX2 64-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Ix2r

Specifications of UPD70F3713GC-8BS-A

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: CSI, UART/USART
• Peripherals: LVD, PWM, WDT
• Number Of I /o: 39
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 6K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

<R>
<R>
with the count clock, and the counter starts counting.
Additionally, the set value of the TPnCCR0 register is transferred to the CCR0 buffer register.
cleared to 0000H, the output of the TOP00 pin is inverted, and a compare match interrupt request signal
(INTTPnCC0) is generated.
166
TPnCTL0
TPnCTL1
When the TPnCE bit is set to 1, the value of the 16-bit counter is cleared from FFFFH to 0000H in synchronization
When the count value of the 16-bit counter matches the value of the CCR0 buffer register, the 16-bit counter is
The interval can be calculated by the following expression.
Interval = (Set value of TPnCCR0 register + 1) × Count clock cycle
Remark
(a) TMPn control register 0 (TPnCTL0)
(b) TMPn control register 1 (TPnCTL1)
TP1SYE
Note Enable setting of the TPkEEE bit to 1 only when timer output (TOPk1) is used.
TPnCE
n = 0 to 3
0/1
0
In this case, set the TPkCCR0 and TPkCCR1 registers to the same value.
TPmEST
Figure 6-11. Register Setting for Interval Timer Mode Operation (1/3)
0
0
TPkEEE
CHAPTER 6 16-BIT TIMER/EVENT COUNTER P (TMP)
0/1
0
Note
0
0
User’s Manual U17716EJ2V0UD
0
0
TPnCKS2 TPnCKS1 TPnCKS0
TPnMD2 TPnMD1 TPnMD0
At this time, the output of the TOP00 pin is inverted.
0/1
0
0/1
0
0/1
0
0: Operate at count clock
1: Count operation
Select count clock
0: Stop counting
1: Enable counting
0, 0, 0:
Interval timer mode
selected in TPkCKS0 to
TPkCKS2 bits
by external event
count input signal