UPD70F3713GC-8BS-A Renesas Electronics America, UPD70F3713GC-8BS-A Datasheet - Page 179

• Manufacturer Part Number: UPD70F3713GC-8BS-A
• Description: MCU 32BIT V850ES/LX2 64-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Ix2r

Specifications of UPD70F3713GC-8BS-A

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: CSI, UART/USART
• Peripherals: LVD, PWM, WDT
• Number Of I /o: 39
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 6K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

<R>
6.6.2
TPkCTL0.TPkCE bit is set to 1, and an interrupt request signal (INTTPkCC0) is generated each time the number of
edges set by the TPkCCR0 register have been counted. The TOP00 and TOPk1 pins cannot be used. When using
the TOPk1 pin in the external event count input mode, set the TPkCTL1.TPkEEE bit to 1 in the interval timer mode
(see 6.6.1 (3) Operation by external event count input (TIPk0)).
TIPk0 pin
(external event
count input)
This mode is valid only in TMP0 and TMP2.
In the external event count mode, the valid edge of the external event count input (TIPk0) is counted when the
The TPkCCR1 register is not used in the external event count mode.
Caution In the external event count mode, the TPkCCR0 and TPkCCR1 registers must not be cleared to
External event count mode (TPkMD2 to TPkMD0 bits = 001)
Remark
0000H.
k = 0, 2
Edge
detector
Figure 6-16. Configuration in External Event Count Mode
CHAPTER 6 16-BIT TIMER/EVENT COUNTER P (TMP)
TPkCE bit
User’s Manual U17716EJ2V0UD
CCR0 buffer register
TPkCCR0 register
16-bit counter
Clear
Match signal
INTTPkCC0 signal
177