UPD70F3713GC-8BS-A Renesas Electronics America, UPD70F3713GC-8BS-A Datasheet - Page 234

• Manufacturer Part Number: UPD70F3713GC-8BS-A
• Description: MCU 32BIT V850ES/LX2 64-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Ix2r

Specifications of UPD70F3713GC-8BS-A

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: CSI, UART/USART
• Peripherals: LVD, PWM, WDT
• Number Of I /o: 39
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 6K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

<R>
6.6.7
is set to 1. Each time the valid edge input to the TIPka pin has been detected, the count value of the 16-bit counter is
stored in the TPkCCRa register, and the 16-bit counter is cleared to 0000H.
signal (INTTPkCCa) occurs.
pins to “No edge detection” by using the TPkIOC1 register.
232
The mode is valid only in TMP0 and TMP2.
In the pulse width measurement mode, 16-bit timer/event counter P starts counting when the TPkCTL0.TPkCE bit
The interval of the valid edge can be measured by reading the TPkCCRa register after a capture interrupt request
As shown in Figure 6-42, select either the TIPk0 or TIPk1 pin as the capture trigger input pin and set the unused
Pulse width measurement mode (TPkMD2 to TPkMD0 bits = 110)
trigger input)
trigger input)
Caution In the pulse width measurement mode, select the internal clock as the count clock (by
Remark
TIPk0 pin
TIPk1 pin
(capture
(capture
clearing the TPkCTL1.TPkEEE bit to 0).
k = 0, 2
a = 0, 1
Figure 6-41. Configuration in Pulse Width Measurement Mode
detector
detector
Edge
Edge
CHAPTER 6 16-BIT TIMER/EVENT COUNTER P (TMP)
selection
TPkCE bit
Count
clock
User’s Manual U17716EJ2V0UD
TPkCCR0 register
(capture)
TPkCCR1 register
Clear
16-bit counter
(capture)
INTTPkOV signal
INTTPkCC0 signal
INTTPkCC1 signal