UPD70F3713GC-8BS-A Renesas Electronics America, UPD70F3713GC-8BS-A Datasheet - Page 188

• Manufacturer Part Number: UPD70F3713GC-8BS-A
• Description: MCU 32BIT V850ES/LX2 64-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Ix2r

Specifications of UPD70F3713GC-8BS-A

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: CSI, UART/USART
• Peripherals: LVD, PWM, WDT
• Number Of I /o: 39
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 6K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

<R>
6.6.3
TPmCTL0.TPmCE bit is set to 1. When the valid edge of an external trigger input (TIPk0) is detected, 16-bit
timer/event counter P starts counting, and outputs a PWM waveform from the TOPm1 pin.
software trigger, a PWM waveform with a duty factor of 50% that has the set value of the TPmCCR0 register + 1 as
half its cycle can also be output from the TOP00 pin.
186
This mode is valid only in TMP0, TMP2, and TMP3 (software trigger only for TMP3).
In the external trigger pulse output mode, 16-bit timer/event counter P waits for a trigger when the
Pulses can also be output by generating a software trigger instead of using the external trigger. When using a
(external trigger input)
External trigger pulse output mode (TPmMD2 to TPmMD0 bits = 010)
Note Because the external trigger input pin (TIPk0) and timer output pin (TOP00) share the same
Caution In the external trigger pulse output mode, select the internal clock as the count clock
Remark
TIPk0 pin
alternate-function pin, two or more functions cannot be used at the same time.
Note
(by clearing the TPkCTL1.TPkEEE bit to 0).
m = 0, 2, 3
k = 0, 2
Figure 6-23. Configuration in External Trigger Pulse Output Mode
Software trigger
selection
generation
Count
clock
CHAPTER 6 16-BIT TIMER/EVENT COUNTER P (TMP)
detector
Edge
TPmCE bit
User’s Manual U17716EJ2V0UD
control
Count
start
CCR1 buffer register
CCR0 buffer register
TPmCCR1 register
TPmCCR0 register
16-bit counter
Match signal
Match signal
Clear
Transfer
Transfer
S
R
controller
controller
Output
(RS-FF)
Output
INTTPmCC1 signal
INTTPmCC0 signal
TOPm1 pin
TOP00 pin
Note