HD64F2319VTE25 Renesas Electronics America, HD64F2319VTE25 Datasheet - Page 608

• Manufacturer Part Number: HD64F2319VTE25
• Description: IC H8S MCU FLASH 512K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of HD64F2319VTE25

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 71
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 17 ROM
17.4.4
• Boot mode
Rev.7.00 Feb. 14, 2007 page 574 of 1108
REJ09B0089-0700
1. Initial state
3. Flash memory initialization
On-Board Programming Modes
Chip
Chip
The old program version or data remains written
in the flash memory. The user should prepare the
programming control program and new
application program beforehand in the host.
The erase program in the boot program area (in
RAM) is executed, and the flash memory is
initialized (to H'FF). In boot mode, entire flash
memory erasure is performed, without regard to
blocks.
Application program
prewrite-erase
Flash memory
Flash memory
Flash memory
Boot program
Boot program
(old version)
Programming control
New application
New application
program
program
program
Host
Host
Boot program area
Programming control
program
RAM
RAM
Figure 17.4 Boot Mode
SCI
SCI
4. Writing new application program
2. Programming control program transfer
Chip
Chip
When boot mode is entered, the boot program in
the chip (originally incorporated in the chip) is
started and the programming control program in
the host is transferred to RAM via SCI
communication. The boot program required for
flash memory erasing is automatically transferred
to the RAM boot program area.
The programming control program transferred
from the host to RAM is executed, and the new
application program in the host is written into the
flash memory.
Application program
New application
Flash memory
Flash memory
Boot program
Boot program
(old version)
program
New application
program
Host
Host
Boot program area
Boot program area
Programming control
Programming control
Program execution state
program
program
RAM
RAM
SCI
SCI