HD64F2319VTE25 Renesas Electronics America, HD64F2319VTE25 Datasheet - Page 822

• Manufacturer Part Number: HD64F2319VTE25
• Description: IC H8S MCU FLASH 512K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of HD64F2319VTE25

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 71
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 17 ROM
(7) Switching of the MATs by FMATS should be needed when programming/erasing of the user
(8) When the data storable area indicated by programming parameter FMPDR is within the flash
In consideration of these conditions, there are three factors; operating mode, the bank structure of
the user MAT, and operations.
The areas in which the programming data can be stored for execution are shown in table 17.26.
Table 17.72 Executable MAT
Operation
Programming
Erasing
Note: * Programming/Erasing is possible to user MATs.
Rev.7.00 Feb. 14, 2007 page 788 of 1108
REJ09B0089-0700
Transitions to the reset state, and hardware standby mode are inhibited during
programming/erasing. When the reset signal is accidentally input to the chip, a longer period
in the reset state than usual (100 μs) is needed before the reset signal is released.
boot MAT is operated in user-boot mode. The program which switches the MATs should be
executed from the on-chip RAM. See section 17.27, Switching between User MAT and User
Boot MAT. Please make sure you know which MAT is selected when switching between
them.
memory area, an error will occur even when the data stored is normal. Therefore, the data
should be transferred to the on-chip RAM to place the address that FMPDR indicates in an
area other than the flash memory.
User Program Mode
Table 17.73 (1)
Table 17.73 (2)
Initiated Modes
User Boot Mode *
Table 17.73 (3)
Table 17.73 (4)