WG82574IT S LBAC Intel, WG82574IT S LBAC Datasheet - Page 168

• Manufacturer Part Number: WG82574IT S LBAC
• Description: CONTROLLER, ENET, INTEL 82574IT, 64PQFN
• Manufacturer: Intel

Specifications of WG82574IT S LBAC

• Ethernet Type: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
• Supply Voltage Range: 3V To 3.6V
• Operating Temperature Range: -40°C To +85°C
• Digital Ic Case Style: QFN
• No. Of Pins: 64
• Package / Case: QFN
• Interface Type: I2C, JTAG, PCI, SPI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7.2.10.3.1
7.2.10.4
Note:
7.2.10.5
7.2.10.6
Table 40.
168
Header Length - HDRLEN
HDRLEN is used to specify the length (in bytes) of the header to be used for each frame
of a TCP segmentation operation. The first HDRLEN bytes fetched from data
descriptor(s) are stored internally and are used as a prototype header. The prototype
header is updated for each packet and is prepended to the packet payload. For UDP
packets this will normally be equal to UDP checksum offset + 2. For TCP messages it
will normally be equal to TCP checksum offset + 4 + TCP header option bytes. This field
is ignored if TDESC.TSE is not set.
Maximum limits for the HDRLEN and MSS fields are dictated by the lengths variables.
However, there is a further restriction that for any TCP segmentation operation, the
hardware must be capable of storing a complete framed fragment (completely-built
frames) in the transmit FIFO prior to transmission. Therefore, the output TX FIFO
(packet buffer) should at least have (MSS + HDRLEN) space available. In addition MSS
must be set to a value more than 0x10 and HDRLEN must be smaller than 256 bytes.
Payload - PAYLEN
The Packet Length field (PAYLEN) is the total number of payload bytes for this TCP
segmentation offload (for example, the total number of payload bytes includes those
that are distributed across multiple frames after TCP segmentation is performed).
Following the fetch of the prototype header, PAYLEN specifies the length of data that is
fetched next from data descriptor(s). This field is also used to determine when last-
frame processing needs to be performed. The PAYLEN specification does not include
any header bytes. This field is ignored if TDESC.TSE is not set.
There is no restriction on the overall PAYLEN specification with respect to the transmit
FIFO size, once the MSS and HDRLEN specifications are legal.
Descriptor Type - DTYP
Setting the descriptor type (TDESC.DTYP) field to 0x0000 identifies this descriptor as a
context descriptor.
Command - TUCMD
The command field (TDESC.TUCMD) provides options that control the checksum
offloading and TCP segmentation features, along with some of the generic descriptor
processing functions.
IDE, DEXT, and RS bits are valid regardless of the state of TSE. All other bits are
ignored if TSE=0b.
Command TUCMD Fields
IDE
7
SNAP
6
DEXT
5
Table 40
Rsv
4
lists the bit definitions for the TDESC.TUCMD field. The
RS
3
TSE
2
IP
1
82574 GbE Controller—Inline Functions
TCP
0