UPD78F0890GK(A)-GAJ-AX NEC, UPD78F0890GK(A)-GAJ-AX Datasheet - Page 213

• Manufacturer Part Number: UPD78F0890GK(A)-GAJ-AX
• Description: 8BIT MCU, 128K FLASH, 7K RAM, LQFP
• Manufacturer: NEC

Specifications of UPD78F0890GK(A)-GAJ-AX

• Controller Family/series: UPD78F
• No. Of I/o's: 55
• Ram Memory Size: 7KB
• Cpu Speed: 20MHz
• No. Of Timers: 10
• No. Of Pwm: RoHS Compliant
• Core Size: 8bit
• Program Memory Size: 128KB
• Oscillator Type: External, Internal

(2) One-shot pulse output with external trigger
Caution 16-bit timer counter 0n starts operating as soon as a value other than 00 (operation stop mode) is
Remark N < M
A one-shot pulse can be output from the TO0n pin by setting 16-bit timer mode control register 0n (TMC0n),
capture/compare control register 0n (CRC0n), and 16-bit timer output control register 0n (TOC0n) as shown in
Figure 7-51, and by using the valid edge of the TI00n pin as an external trigger.
The valid edge of the TI00n pin is specified by bits 4 and 5 (ES0n0, ES0n1) of prescaler mode register 0n
(PRM0n). The rising, falling, or both the rising and falling edges can be specified.
When the valid edge of the TI00n pin is detected, the 16-bit timer/event counter is cleared and started, and the
output becomes active at the count value set in advance to 16-bit timer capture/compare register 01n (CR01n).
After that, the output becomes inactive at the count value set in advance to 16-bit timer capture/compare register
00n (CR00n)
CR01n set value
CR00n set value
TO0n pin output
Note The case where N < M is described here. When N > M, the output becomes active with the CR00n
Caution Even if the external trigger is generated again while the one-shot pulse is output, it is ignored.
Remark n = 0 to 3
Count clock
TM0n count
INTTM01n
INTTM00n
OSPT0n
register and inactive with the CR01n register. Do not set N to M.
set to the TMC0n3 and TMC0n2 bits.
Figure 7-50. Timing of One-Shot Pulse Output Operation with Software Trigger
Note
.
Set TMC0n to 04H
(TM0n count starts)
0000H
M
N
0001H
CHAPTER 7 16-BIT TIMER/EVENT COUNTERS 00 TO 03
N
User’s Manual U17554EJ4V0UD
N + 1
N
M
0000H
N – 1
M
N
N
M – 1
M
M
N
M + 1 M + 2
213