CY7C67200-48BAXI Cypress Semiconductor Corp, CY7C67200-48BAXI Datasheet - Page 37

• Manufacturer Part Number: CY7C67200-48BAXI
• Description: USB HOST/PERIPH CNTRLR 48LFBGA
• Manufacturer: Cypress Semiconductor Corp
• Series: EZ-OTG™r
• Type: OTG Programmable USB On The Gor

Specifications of CY7C67200-48BAXI

• Package / Case: 48-LFBGA
• Controller Type: USB Peripheral Controller
• Interface: Serial
• Voltage - Supply: 2.7 V ~ 3.6 V, 3 V ~ 3.6 V
• Current - Supply: 80mA, 135mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Data Rate: 2 Mbps
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Operating Temperature Range: - 40 C to + 85 C
• Supply Current: 80 mA
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.7 V
• Operating Supply Voltage: 2.7 V to 3.6 V
• Controller Family/series: PSoC 1
• Core Size: 16 Bit
• No. Of I/o's: 25
• Program Memory Size: 16KB
• Ram Memory Size: 8KB
• Cpu Speed: 48MHz
• No. Of Timers: 2
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: CY3663 - KIT DEV EZ-OTG/EZ-HOST
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 428-2262; CY7C67200-48BAXI

Document #: 38-08014 Rev. *G
Reset Interrupt Flag (Bit 8)
The Reset Interrupt Flag bit indicates if the USB Reset
Detected interrupt has triggered.
1: Interrupt triggered
0: Interrupt did not trigger
EP7 Interrupt Flag (Bit 7)
The EP7 Interrupt Flag bit indicates if the endpoint seven
(EP7) Transaction Done interrupt has triggered. An EPx
Transaction Done interrupt triggers when any of the following
responses or events occur in a transaction for the device’s
given EP: send/receive ACK, send STALL, Timeout occurs, IN
Exception Error, or OUT Exception Error. In addition, if the
NAK Interrupt Enable bit in the Device n Endpoint Control
register is set, this interrupt also triggers when the device
NAKs host requests.
1: Interrupt triggered
0: Interrupt did not trigger
EP6 Interrupt Flag (Bit 6)
The EP6 Interrupt Flag bit indicates if the endpoint six (EP6)
Transaction Done interrupt has triggered. An EPx Transaction
Done interrupt triggers when any of the following responses or
events occur in a transaction for the device’s given EP:
send/receive ACK, send STALL, Timeout occurs, IN Exception
Error, or OUT Exception Error. In addition, if the NAK Interrupt
Enable bit in the Device n Endpoint Control register is set, this
interrupt also triggers when the device NAKs host requests.
1: Interrupt triggered
0: Interrupt did not trigger
EP5 Interrupt Flag (Bit 5)
The EP5 Interrupt Flag bit indicates if the endpoint five (EP5)
Transaction Done interrupt has triggered. An EPx Transaction
Done interrupt triggers when any of the following responses or
events occur in a transaction for the device’s given EP:
send/receive ACK, send STALL, Timeout occurs, IN Exception
Error, or OUT Exception Error. In addition, if the NAK Interrupt
Enable bit in the Device n Endpoint Control register is set, this
interrupt also triggers when the device NAKs host requests.
1: Interrupt triggered
0: Interrupt did not trigger
EP4 Interrupt Flag (Bit 4)
The EP4 Interrupt Flag bit indicates if the endpoint four (EP4)
Transaction Done interrupt has triggered. An EPx Transaction
Done interrupt triggers when any of the following responses or
events occur in a transaction for the device’s given EP:
send/receive ACK, send STALL, Timeout occurs, IN Exception
Error, or OUT Exception Error. In addition, if the NAK Interrupt
Enable bit in the Device n Endpoint Control register is set, this
interrupt also triggers when the device NAKs host requests.
1: Interrupt triggered
0: Interrupt did not trigger
EP3 Interrupt Flag (Bit 3)
The EP3 Interrupt Flag bit indicates if the endpoint three (EP3)
Transaction Done interrupt has triggered. An EPx Transaction
Done interrupt triggers when any of the following responses or
events occur in a transaction for the device’s given EP:
send/receive ACK, send STALL, Timeout occurs, IN Exception
Error, or OUT Exception Error. In addition, if the NAK Interrupt
Enable bit in the Device n Endpoint Control register is set, this
interrupt also triggers when the device NAKs host requests.
1: Interrupt triggered
0: Interrupt did not trigger
EP2 Interrupt Flag (Bit 2)
The EP2 Interrupt Flag bit indicates if the endpoint two (EP2)
Transaction Done interrupt has triggered. An EPx Transaction
Done interrupt triggers when any of the following responses or
events occur in a transaction for the device’s given EP:
send/receive ACK, send STALL, Timeout occurs, IN Exception
Error, or OUT Exception Error. In addition, if the NAK Interrupt
Enable bit in the Device n Endpoint Control register is set, this
interrupt also triggers when the device NAKs host requests.
1: Interrupt triggered
0: Interrupt did not trigger
EP1 Interrupt Flag (Bit 1)
The EP1 Interrupt Flag bit indicates if the endpoint one (EP1)
Transaction Done interrupt has triggered. An EPx Transaction
Done interrupt triggers when any of the following responses or
events occur in a transaction for the device’s given EP:
send/receive ACK, send STALL, Timeout occurs, IN Exception
Error, or OUT Exception Error. In addition, if the NAK Interrupt
Enable bit in the Device n Endpoint Control register is set, this
interrupt also triggers when the device NAKs host requests.
1: Interrupt triggered
0: Interrupt did not trigger
EP0 Interrupt Flag (Bit 0)
The EP0 Interrupt Flag bit indicates if the endpoint zero (EP0)
Transaction Done interrupt has triggered. An EPx Transaction
Done interrupt triggers when any of the following responses or
events occur in a transaction for the device’s given EP:
send/receive ACK, send STALL, Timeout occurs, IN Exception
Error, or OUT Exception Error. In addition, if the NAK Interrupt
Enable bit in the Device n Endpoint Control register is set, this
interrupt also triggers when the device NAKs host requests.
1: Interrupt triggered
0: Interrupt did not trigger
Reserved
All reserved bits must be written as ‘0’.
CY7C67200
Page 37 of 78
[+] Feedback