S9S12HY64J0MLH Freescale Semiconductor, S9S12HY64J0MLH Datasheet - Page 347

• Manufacturer Part Number: S9S12HY64J0MLH
• Description: MCU 64K FLASH AUTO 64-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of S9S12HY64J0MLH

• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: CAN, EBI/EMI, I²C, IrDA, LIN, SCI, SPI
• Peripherals: LCD, Motor control PWM, POR, PWM, WDT
• Number Of I /o: 50
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 64-LQFP
• Controller Family/series: S12
• No. Of I/o's: 50
• Ram Memory Size: 4KB
• Cpu Speed: 64MHz
• No. Of Timers: 2
• Rohs Compliant: Yes
• Processor Series: S12HY
• Core: HCS12
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: DEMO9S12HY64
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Freescale Semiconductor
Extended Identifier
Standard Identifier
1. Although this mode can be used for standard identifiers, it is recommended to use the four or eight identifier acceptance
CAN 2.0A/B
•
•
•
filters for standard identifiers
CAN 2.0B
— The 11 bits of the standard identifier plus the RTR and IDE bits of the CAN 2.0A/B messages
Four identifier acceptance filters, each to be applied to
— a) the 14 most significant bits of the extended identifier plus the SRR and IDE bits of CAN 2.0B
— b) the 11 bits of the standard identifier, the RTR and IDE bits of CAN 2.0A/B messages.
Eight identifier acceptance filters, each to be applied to the first 8 bits of the identifier. This mode
implements eight independent filters for the first 8 bits of a CAN 2.0A/B compliant standard
identifier or a CAN 2.0B compliant extended identifier.
bank (CANIDAR0–CANIDAR3, CANIDMR0–CANIDMR3) produces filter 0 to 3 hits. Similarly,
the second filter bank (CANIDAR4–CANIDAR7, CANIDMR4–CANIDMR7) produces filter 4 to
7 hits.
Closed filter. No CAN message is copied into the foreground buffer RxFG, and the RXF flag is
never set.
This mode implements two filters for a full length CAN 2.0B compliant extended identifier.
Figure 9-40
CANIDMR0–CANIDMR3) produces a filter 0 hit. Similarly, the second filter bank
(CANIDAR4–CANIDAR7, CANIDMR4–CANIDMR7) produces a filter 1 hit.
messages or
Figure 9-41
CANIDMR0–3CANIDMR) produces filter 0 and 1 hits. Similarly, the second filter bank
(CANIDAR4–CANIDAR7, CANIDMR4–CANIDMR7) produces filter 2 and 3 hits.
AM7
AC7
ID28
ID10
CANIDMR0
CANIDAR0
shows how the first 32-bit filter bank (CANIDAR0–CANIDAR3,
shows how the first 32-bit filter bank (CANIDAR0–CANIDA3,
IDR0
IDR0
Figure 9-40. 32-bit Maskable Identifier Acceptance Filter
MC9S12HY/HA-Family Reference Manual Rev. 1.04
AM0
ID21
AC0
ID3
AM7
AC7
ID20
ID2
CANIDMR1
CANIDAR1
IDR1
IDR1
ID Accepted (Filter 0 Hit)
IDE
AM0
ID15
AC0
Freescale’s Scalable Controller Area Network (S12MSCANV3)
AM7
AC7
ID14
ID10
Figure 9-42
CANIDMR2
CANIDAR2
IDR2
IDR2
shows how the first 32-bit filter
AM0
AC0
ID7
ID3
AM7
AC7
ID6
ID10
CANIDMR3
CANIDAR3
IDR3
IDR3
AM0
AC0
RTR
ID3
347
1
.