S9S12HY64J0MLH Freescale Semiconductor, S9S12HY64J0MLH Datasheet - Page 576

• Manufacturer Part Number: S9S12HY64J0MLH
• Description: MCU 64K FLASH AUTO 64-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of S9S12HY64J0MLH

• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: CAN, EBI/EMI, I²C, IrDA, LIN, SCI, SPI
• Peripherals: LCD, Motor control PWM, POR, PWM, WDT
• Number Of I /o: 50
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 64-LQFP
• Controller Family/series: S12
• No. Of I/o's: 50
• Ram Memory Size: 4KB
• Cpu Speed: 64MHz
• No. Of Timers: 2
• Rohs Compliant: Yes
• Processor Series: S12HY
• Core: HCS12
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: DEMO9S12HY64
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

48 KByte Flash Module (S12FTMRC48K1V1)
16.3.2.6
The FERCNFG register enables the Flash error interrupts for the FERSTAT flags.
All assigned bits in the FERCNFG register are readable and writable.
576
Offset Module Base + 0x0005
IGNSF
Reset
FDFD
FSFD
Field
CCIE
7
4
1
0
W
R
Command Complete Interrupt Enable — The CCIE bit controls interrupt generation when a Flash command
has completed.
0 Command complete interrupt disabled
1 An interrupt will be requested whenever the CCIF flag in the FSTAT register is set (see
Ignore Single Bit Fault — The IGNSF controls single bit fault reporting in the FERSTAT register (see
Section
0 All single bit faults detected during array reads are reported
1 Single bit faults detected during array reads are not reported and the single bit fault interrupt will not be
read operations and check the associated interrupt routine. The FDFD bit is cleared by writing a 0 to FDFD. The
FECCR registers will not be updated during the Flash array read operation with FDFD set unless an actual
double bit fault is detected.
0 Flash array read operations will set the DFDIF flag in the FERSTAT register only if a double bit fault is detected
1 Any Flash array read operation will force the DFDIF flag in the FERSTAT register to be set (see
Force Single Bit Fault Detect
read operations and check the associated interrupt routine. The FSFD bit is cleared by writing a 0 to FSFD. The
FECCR registers will not be updated during the Flash array read operation with FSFD set unless an actual single
bit fault is detected.
0 Flash array read operations will set the SFDIF flag in the FERSTAT register only if a single bit fault is detected
1 Flash array read operation will force the SFDIF flag in the FERSTAT register to be set (see
Force Double Bit Fault Detect — The FDFD bit allows the user to simulate a double bit fault during Flash array
Flash Error Configuration Register (FERCNFG)
0
0
7
generated
Section
register is set (see
and an interrupt will be generated as long as the SFDIE interrupt enable in the FERCNFG register is set (see
Section
16.3.2.8).
= Unimplemented or Reserved
16.3.2.7) and an interrupt will be generated as long as the DFDIE interrupt enable in the FERCNFG
16.3.2.6)
Figure 16-10. Flash Error Configuration Register (FERCNFG)
0
0
6
MC9S12HY/HA-Family Reference Manual, Rev. 1.04
Section
Table 16-12. FCNFG Field Descriptions
16.3.2.6)
0
0
5
—
The FSFD bit allows the user to simulate a single bit fault during Flash array
0
0
4
Description
0
0
3
0
0
2
Freescale Semiconductor
DFDIE
0
1
Section
Section
16.3.2.7)
SFDIE
16.3.2.7)
0
0