M30626FJPFP#D5C Renesas Electronics America, M30626FJPFP#D5C Datasheet - Page 109

• Manufacturer Part Number: M30626FJPFP#D5C
• Description: MCU 3/5V 512K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/60r

Specifications of M30626FJPFP#D5C

• Core Processor: M16C/60
• Core Size: 16-Bit
• Speed: 24MHz
• Connectivity: I²C, IEBus, UART/USART
• Peripherals: DMA, WDT
• Number Of I /o: 85
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 31K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 26x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

M16C/62P Group (M16C/62P, M16C/62PT)
Rev.2.41
REJ09B0185-0241
Figure 10.9
Jan 10, 2006
NOTES :
1. PLL operation mode can be entered from high speed mode.
Procedure to Use PLL Clock as CPU Clock Source
Set the PLC02 to PLC00 bits (multiplying factor).
(When PLL clock > 16MHz)
Set the PM20 bit to “0” (2 wait states).
Set the PLC07 bit to “1” (PLL operation).
Wait until the PLL clock becomes stable (tsu(PLL)).
Set the CM11 bit to “1” (PLL clock for the CPU clock source).
Set the CM07 bit to “0” (main clock), the CM17 to CM16 bits
to “00b” (main clock undivided), and the CM06 bit to “0”
(CM16 and CM17 bits enabled).
Page 92 of 390
Using the PLL clock as the clock source for the CPU
END
(1)
10. Clock Generation Circuit