PIC18F4520-I/P Microchip Technology Inc., PIC18F4520-I/P Datasheet - Page 3

• Manufacturer Part Number: PIC18F4520-I/P
• Description: 40 Pin, 32 KB Flash, 1536 RAM, 36 I/O
• Manufacturer: Microchip Technology Inc.

Specifications of PIC18F4520-I/P

• A/d Inputs: 13-Channel, 10-Bit
• Comparators: 2
• Cpu Speed: 10 MIPS
• Eeprom Memory: 256 Bytes
• Input Output: 36
• Interface: I2C/SPI/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 40-pin PDIP
• Programmable Memory: 32K Bytes
• Ram Size: 1.5K Bytes
• Speed: 40 MHz
• Timers: 1-8-bit, 3-16-bit
• Voltage, Range: 2-5.5 V
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

Power Managed Modes:
• Run: CPU on, peripherals on
• Idle: CPU off, peripherals on
• Sleep: CPU off, peripherals off
• Idle mode currents down to 5.8 A typical
• Sleep mode current down to 0.1 A typical
• Timer1 Oscillator: 1.8 A, 32 kHz, 2V
• Watchdog Timer: 2.1 A
• Two-Speed Oscillator Start-up
Peripheral Highlights:
• High-current sink/source 25 mA/25 mA
• Three programmable external interrupts
• Four input change interrupts
• Up to 2 Capture/Compare/PWM (CCP) modules,
• Enhanced Capture/Compare/PWM (ECCP)
• Master Synchronous Serial Port (MSSP) module
• Enhanced Addressable USART module:
• 10-bit, up to 13-channel Analog-to-Digital
• Dual analog comparators with input multiplexing)
 2004 Microchip Technology Inc.
one with Auto-Shutdown (28-pin devices)
module (40/44-pin devices only):
- One, two or four PWM outputs
- Selectable polarity
- Programmable dead time
- Auto-Shutdown and Auto-Restart
supporting 3-wire SPI™ (all 4 modes) and I
Master and Slave Modes
- Supports RS-485, RS-232 and LIN 1.2
- RS-232 operation using internal oscillator
- Auto-Wake-up on Start bit
- Auto-Baud Detect
Converter module (A/D):
- Auto-acquisition capability
- Conversion available during Sleep
block (no external crystal required)
28/40/44-Pin Enhanced Flash Microcontrollers with
10-Bit A/D and nanoWatt Technology
PIC18F2420/2520/4420/4520
2
C™
Preliminary
Flexible Oscillator Structure:
• Four Crystal modes, up to 40 MHz
• 4X Phase Lock Loop (available for crystal and
• Two External RC modes, up to 4 MHz
• Two External Clock modes, up to 40 MHz
• Internal oscillator block:
• Secondary oscillator using Timer1 @ 32 kHz
• Fail-Safe Clock Monitor:
Special Microcontroller Features:
• C compiler optimized architecture:
• 100,000 erase/write cycle Enhanced Flash
• 1,000,000 erase/write cycle Data EEPROM
• Flash/Data EEPROM Retention: 100 years typical
• Self-programmable under software control
• Priority levels for interrupts
• 8 x 8 Single-Cycle Hardware Multiplier
• Extended Watchdog Timer (WDT):
• Single-supply 5V In-Circuit Serial
• In-Circuit Debug (ICD) via two pins
• Wide operating voltage range: 2.0V to 5.5V
• Programmable 16-level High/Low-Voltage
• Programmable Brown-out Reset (BOR
internal oscillators)
- 8 user selectable frequencies, from 31 kHz to 8 MHz
- Provides a complete range of clock speeds
- User tunable to compensate for frequency drift
- Allows for safe shutdown if peripheral clock stops
- Optional extended instruction set designed to
program memory typical
memory typical
- Programmable period from 4 ms to 131s
Programming™ (ICSP™) via two pins
Detection (HLVD) module:
- Supports interrupt on High/Low-Voltage
- With software enable option
from 31 kHz to 32 MHz when used with PLL
optimize re-entrant code
Detection
DS39631A-page 1