EP2S130F1020I5N Altera, EP2S130F1020I5N Datasheet - Page 21

EP2S130F1020I5N

Manufacturer Part Number
EP2S130F1020I5N
Description
Manufacturer
Altera
Datasheet

Specifications of EP2S130F1020I5N

Family Name
Stratix II
Number Of Logic Blocks/elements
132540
# I/os (max)
742
Frequency (max)
609.76MHz
Process Technology
90nm (CMOS)
Operating Supply Voltage (typ)
1.2V
Logic Cells
132540
Ram Bits
6747840
Operating Supply Voltage (min)
1.15V
Operating Supply Voltage (max)
1.25V
Operating Temp Range
-40C to 100C
Operating Temperature Classification
Industrial
Mounting
Surface Mount
Pin Count
1020
Package Type
FC-FBGA
Lead Free Status / Rohs Status
Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
EP2S130F1020I5N
Manufacturer:
ALTERA
Quantity:
215
Part Number:
EP2S130F1020I5N
Manufacturer:
ALTERA
0
Part Number:
EP2S130F1020I5N
Manufacturer:
ALTERA/阿尔特拉
Quantity:
20 000
Part Number:
EP2S130F1020I5N
0
Altera Corporation
May 2007
datae1 and dataf1 are utilized, the output drives to register1
and/or bypasses register1 and drives to the interconnect using the
bottom set of output drivers. The Quartus II Compiler automatically
selects the inputs to the LUT. Asynchronous load data for the register
comes from the datae or dataf input of the ALM. ALMs in normal
mode support register packing.
Figure 2–9. 6-Input Function in Normal Mode
Notes to
(1)
(2)
Extended LUT Mode
The extended LUT mode is used to implement a specific set of
seven-input functions. The set must be a 2-to-1 multiplexer fed by two
arbitrary five-input functions sharing four inputs.
template of supported seven-input functions utilizing extended LUT
mode. In this mode, if the seven-input function is unregistered, the
unused eighth input is available for register packing.
Functions that fit into the template shown in
in designs. These functions often appear in designs as “if-else” statements
in Verilog HDL or VHDL code.
datae0
datae1
dataf0
dataf1
dataa
datab
datad
datac
(2)
If datae1 and dataf1 are used as inputs to the six-input function, then datae0
and dataf0 are available for register packing.
The dataf1 input is available for register packing only if the six-input function is
un-registered.
These inputs are available for register packing.
Figure
2–9:
6-Input
LUT
Stratix II Device Handbook, Volume 1
Notes
Figure 2–10
D
D
reg0
reg1
(1),
Figure 2–10
Q
Q
Stratix II Architecture
(2)
occur naturally
To general or
local routing
To general or
local routing
To general or
local routing
shows the
2–13

Related parts for EP2S130F1020I5N