EP9315-CBZ Cirrus Logic Inc, EP9315-CBZ Datasheet - Page 760

• Manufacturer Part Number: EP9315-CBZ
• Description: IC ARM9 SOC ENH UNIV 352PBGA
• Manufacturer: Cirrus Logic Inc
• Series: EP9r

Specifications of EP9315-CBZ

• Core Size: 16/32-Bit
• Core Processor: ARM9
• Speed: 200MHz
• Connectivity: EBI/EMI, EIDE, Ethernet, I²C, IrDA, Keypad/Touchscreen, PCMCIA, SPI, UART/USART, USB
• Peripherals: AC'97, DMA, I&sup2:S, LCD, LED, MaverickKey, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 352-BGA
• Controller Family/series: (ARM9)
• No. Of I/o's: 16
• Cpu Speed: 200MHz
• No. Of Timers: 5
• Digital Ic Case Style: BGA
• Supply Voltage Range: 1.65V To 1.94V, 3V To 3.6V
• Embedded Interface Type: SPI
• Rohs Compliant: Yes
• Processor Series: EP93xx
• Core: ARM920T
• Data Bus Width: 32 bit
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: EDB9315A-Z
• Case: BGA
• Dc: 06+
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1144 - KIT DEVELOPMENT EP9315 ARM9
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 598-1139

25
TSSetup2
25-22
Analog Touch Screen Interface
EP93xx User’s Guide
31
15
Address:
Default:
Definition:
Bit Descriptions:
30
14
RSVD
29
13
28
12
0x8090_0024
0x0000_0000
Touch screen Setup Register #2.
RSVD:
RINTEN:
S28EN:
NSIGND:
DISDEV:
DTMEN:
DINTEN:
RINTEN
27
11
S28EN
26
10
Copyright 2007 Cirrus Logic
NSIGND
25
9
Reserved. Unknown during read.
Synchronous Data Ready Interrupt Enable. Setting this bit
results in an interrupt whenever the Synchronous Data
Ready (SDR) bit in the TSXYResult register is set. The
SDR bit will never be set unless the EN bit of the TSSetup
register is clear.
Switch 28 Enable. The touch detect NAND gate can be
triggered separately by bit 28 of the switch registers or in
conjunction with bit 22 which also controls the X+ pullup.
0 = NAND gate controlled by bit 22.
1 = NAND gate controlled by bit 28.
Unsigned ADC output type. The touch input information
can be processed as signed or unsigned integers. The
default bit value is “0” for signed.
Disable Deviation check for both X and Y ADC sampling.
Setting this bit high causes the deviation test to always
pass and forces a sample set.
Deviation Timer Enable. Setting this bit high enables the
timeout for the deviation check. If the deviation check fails
255 times for either the X or Y axis the algorithm will skip
this check and force a sample set anyway.
Deviation Error Interrupt Enable. Setting this bit high
causes an interrupt when the sample deviation check fails
255 times for either the X or Y axis. The DTMEN bit must
be high for this bit to be effective.
DISDEV
24
8
RSVD
DTMEN
23
7
DINTEN
22
6
DEVINT
21
5
PINTEN
20
4
PENSTS
19
3
PINT
18
2
NICOR
17
1
DS785UM1
TINT
16
0