AT90PWM81-16SN Atmel, AT90PWM81-16SN Datasheet - Page 50

• Manufacturer Part Number: AT90PWM81-16SN
• Description: IC MCU AVR 8K FLASH ISP 20SOIC
• Manufacturer: Atmel
• Series: AVR® 90PWM Lightingr

Specifications of AT90PWM81-16SN

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: SPI
• Peripherals: Brown-out Detect/Reset, PWM, WDT
• Number Of I /o: 16
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 20-SOIC (7.5mm Width)
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: SPI
• Maximum Clock Frequency: 16 MHz
• Number Of Timers: 1
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• On-chip Dac: 10 bit, 1 Channel
• Height: 2.35 mm
• Length: 13 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.7 V
• Width: 7.6 mm
• For Use With: ATSTK600-SOIC - STK600 SOCKET/ADAPTER FOR SOIC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7.1.3
50
AT90PWM81
Power-on Reset
Figure 7-1.
Table 7-1.
Notes:
A Power-on Reset (POR) pulse is generated by an On-chip detection circuit. The detection level is defined
in
used to trigger the start-up Reset, as well as to detect a failure in supply voltage.
A Power-on Reset (POR) circuit ensures that the device is reset from Power-on. Reaching the Power-on
Reset threshold voltage invokes the delay counter, which determines how long the device is kept in
RESET after V
below the detection level.
Symbol
Table
V
V
t
RST
POT
RST
BODLEVEL [2..0]
1. Values are guidelines only..
2. The Power-on Reset will not work unless the supply voltage has been below V
7-1. The POR is activated whenever V
Parameter
Power-on Reset Threshold Voltage
(rising)
Power-on Reset Threshold Voltage
(falling)
Minimum pulse width on RESET
Pin
RESET Pin Threshold Voltage
CC
Reset Logic
Reset Characteristics
rise. The RESET signal is activated again, without any delay, when V
(2)
Pull-up Resistor
Spike
Filter
RSTDIS
(1)
CKSEL[3:0]
Power-on Reset
Reset Circuit
SUT[1:0]
Brown-out
Watchdog
Oscillator
Generator
Circuit
Clock
CC
is below the detection level. The POR circuit can be
Condition
CK
Register (MCUSR)
MCU Status
DATA BUS
Delay Counters
0.2Vcc
Min.
Typ.
400
1.4
1.3
TIMEOUT
POT
(falling)
0.85Vcc
7734P–AVR–08/10
Max.
2.3
2.3
CC
decreases
Units
ns
V
V
V