ML610Q412P-NNNTB03A7 Rohm Semiconductor, ML610Q412P-NNNTB03A7 Datasheet - Page 55

• Manufacturer Part Number: ML610Q412P-NNNTB03A7
• Description: MCU 8BIT 16K FLASH 120-TQFP
• Manufacturer: Rohm Semiconductor

Specifications of ML610Q412P-NNNTB03A7

• Core Processor: nX-U8/100
• Core Size: 8-Bit
• Speed: 625kHz
• Connectivity: I²C, SSP, UART/USART
• Peripherals: LCD, POR, PWM, WDT
• Number Of I /o: 14
• Program Memory Size: 16KB (8K x 16)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.1 V ~ 3.6 V
• Data Converters: A/D 2x12b, 2x24b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

• DSAD (bit 0)
When certain bits of block control registers are set to “1”, corresponding peripherals are reset (all registers are reset)
and operating clocks for the peripherals stop. Writing to every SFR (special function register) in the corresponding
peripherals is not valid while the bits of block control registers are set to “1” and returns the initial value for read.
Ensure the bits are reset to “0” before using the peripherals to enable the operation.
Note:
See Chapter 26, “LCD Driver” for detail about operation of LCD driver.
See Chapter 27, “Battery Level Detector” for detail about operation of BLD.
See Chapter 3, “Reset Function” for detail about operation of 32kHz oscillation stop detector.
See Chapter 24, “RC Oscillation Type A/D Converter” for detail about operation of RC oscillation type A/D converter.
See Chapter 25, “Successive Approximation” for detail about operation of SA type A/D converter.
The DSAD bit is used to control SA type A/D converter operation. When the DSAD bit is set to “1”, the circuits
related to SA type A/D converter are reset and turned off.
DSAD
0
1
Enable operating SA type A/D converter (initial value)
Disable operating SA type A/D converter
Description
4 – 10
ML610Q411/ML610Q412/ML610Q415 User’s Manual
Chapter 4 MCU Control Function