ML610Q412P-NNNTB03A7 Rohm Semiconductor, ML610Q412P-NNNTB03A7 Datasheet - Page 91

• Manufacturer Part Number: ML610Q412P-NNNTB03A7
• Description: MCU 8BIT 16K FLASH 120-TQFP
• Manufacturer: Rohm Semiconductor

Specifications of ML610Q412P-NNNTB03A7

• Core Processor: nX-U8/100
• Core Size: 8-Bit
• Speed: 625kHz
• Connectivity: I²C, SSP, UART/USART
• Peripherals: LCD, POR, PWM, WDT
• Number Of I /o: 14
• Program Memory Size: 16KB (8K x 16)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.1 V ~ 3.6 V
• Data Converters: A/D 2x12b, 2x24b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

6.3
6.3.1
6.3.1.1
Figure 6-2 shows the configuration of the low-speed clock generation circuit.
ML610Q411/ML610Q412:
A low-speed clock generation circuit is provided with an external 32.768 kHz crystal. To match the oscillation
frequency by using a trimmer capacitor, connect external capacitors (C
In STOP mode, V
Impedance state). When the ENMLT bit of FCON1 is set to “1”, the 2× low-speed clock circuit starts to generalte the
LSCLK×2(64kHz).
ML610Q415:
LSCLK is genrated by the high-speed clock generation circuit and the 1/16 devider. An external crystal oscillator is not
requred. In STOP mode, the high-speed clock oscillation stops. When the ENMLT bit of FCON1 is set to “1”, the 2×
low-speed clock circuit starts to generate the LSCLK×2(62.5kHz).
Notes:
− Install a crystal as close to the LSI as possible and make sure that signals causing noise and power supply wiring are
− Note that oscillation may stop due to condensation.
not near the crystal and its wiring.
Description of Operation
Low-Speed Clock
V
Low-Speed Clock Generation Circuit
C
SS
32.768 kHz
GL
Figure 6-2-1 Circuit Configuration of 32.768 kHz Crystal Oscillation Mode
Figure 6-2-2 Circuit Configuration of 1/16 of 500kHz RC Oscillation Mode
C
crystal
DL
DDX
is powered off to stop low-speed oscillation, and the XT0 and XT1 pins become Hiz (Hi
XT1
XT0
oscillation circuit
High-speed
V
SS
V
SS
C
C
V
G
D
Devider
DDX
1/16
R
Control Circuit
F
6 – 6
ML610Q411/ML610Q412/ML610Q415 User’s Manual
2× clock
circuit
GL
and C
2× clock
circuit
STOP mode
2× low-speed clock
ENMLT
Low-speed clock
(LSCLK)
Chapter 6 Clock Generation Circuit
(LSCLK×2)
DL
) as required.
STOP mode
2× low-speed clock
(LSCLK×2)
ENMLT
Low-speed clock
(LSCLK)