KSZ8851-32MQLI Micrel Inc, KSZ8851-32MQLI Datasheet - Page 41

• Manufacturer Part Number: KSZ8851-32MQLI
• Description: IC CTLR MAC/PHY NON PCI 128PQFP
• Manufacturer: Micrel Inc

Specifications of KSZ8851-32MQLI

• Controller Type: Ethernet Controller, MAC/PHY
• Interface: Bus
• Voltage - Supply: 1.8V, 2.5V, 3.3V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 128-MQFP, 128-PQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Supply: -
• Other names: 576-3630; KSZ8851-32MQLI

Micrel, Inc.
KSZ8851-16/32 MQL/MQLI
Loopback Support
The KSZ8851M provides two loopback modes, one is Near-end (Remote) loopback to support for remote diagnostic of
failure at line side, and the other is Far-end (Local) loopback to support for local diagnostic of failure at host side. In
loopback mode, the speed at the PHY port will be set to 100BASE-TX full-duplex mode.
Near-end (Remote) Loopback
Near-end (Remote) loopback is conducted at PHY port 1 of the KSZ8851M. The loopback path starts at the PHY port’s
receive inputs (RXP1/RXM1), wraps around at the same PHY port’s PMD/PMA, and ends at the PHY port’s transmit
outputs (TXP1/TXM1).
Bit [9] of register P1SCLMD (0xF4) is used to enable near-end loopback. The ports 1 near-end loopback path is illustrated
in the following Figure 11.
Far-end (Local) Loopback
Far-end (Local) loopback is conducted at Host of the KSZ8851M. The loopback path starts at the host port’s transmit
inputs (Tx data), wraps around at the PHY port’s PMD/PMA, and ends at the host port’s receive outputs (Rx data)
Bit [14] of register P1MBCR (0xE4) is used to enable far-end loopback at host side. The host far-end loopback path is
illustrated in the following Figure 11.
Figure 11. PHY Port 1 Near-end (Remote) and Host Far-end (Local) Loopback Paths
August 2009
41
M9999-083109-2.0