TMP89xy60UG/FG Toshiba, TMP89xy60UG/FG Datasheet - Page 356

• Manufacturer Part Number: TMP89xy60UG/FG
• Manufacturer: Toshiba

Specifications of TMP89xy60UG/FG

• Package: LQFP64/QFP64
• Rom Types (m=mask,p=otp,f=flash): M/F
• Rom Size: 32/60
• Ram Size: 3K
• Driver Led: 8
• Driver Lcd: -
• Spi/sio Channels: -
• Uart/sio Channels: 2
• I2c/sio Channels: 1
• High-speed Serial Output: -
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 16
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 2
• Timer Counter 8-bit Channel: 4
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: Y
• Number Of I/o Ports: 58
• Power Supply (v): 4.3 to 5.5

21.5
Access to the Flash Memory Area
RA006
main section code abs = 0xF000
; #### Transfer the program to RAM ####
sRAMLOOP:
; #### Set a nonmaskable interrupt vector inside the RAM area ####
; #### Allocate RAM to the code area. Switch the vector area to RAM ####
; #### Allocate BOOTROM to the data/code area ####
; #### Check the status of the security program ####
; #### Security program enable process (API) ####
Example:
3. After setting both SYSCR3<RAREA> and SYSCR3<RVCTR> to "1", set "0xD4" on SYSCR4.
4. Set "0xD5" on FLSCR2<CR1EN> after setting FLSCR1<BAREA> to "1".
5. Set "0xD5" to A register as enable code.
6. Set "0x00" to C register.
7. Call address (0x1016). (After processing, security program state returns to A register.)
8. If A register is not "0xFF", jump to sSKIP because security program is already set.
9. Set "0xD5" to A register as enable code.
10. Set "0x00" to C register.
11. Call address (0x1016). (Security program is performed.)
12. Set "0xD5" to FLSCR2 after setting FLSCR1<BAREA> to "0".
13. Set "0xD4" to SYSCR4 after setting SYSCR3<RAREA, RVCTR> to "0".
Then allocate RAM to the code area, and switch the vector area to the RAM area.
Whether the security program is enabled or disabled is checked. If it is disabled, it is enabled.
.BTWrite
.BTEraseSec
.BTEraseChip equ 0x1014
.BTGetRP
.BTSetRP
cRAMStartAdd equ 0x0200
LD
LD
LD
LD
INC
INC
CMP
J
LD
LDW
LD
LDW
LD
LD
LD
LD
LD
LD
CALL
CMP
J
LD
equ 0x1010
equ 0x1012
equ 0x1016
equ 0x1018
HL,cRAMStartAdd
IX,sRAMprogStart
A,(IX)
(HL),A
HL
IX
IX,sRAMprogEnd
NZ,sRAMLOOP
HL,0x01FC
(HL),sINTSWI - sRAMprogStart + cRAMStartAdd
HL,0x01F8
(HL),sINTWDT - sRAMprogStart + cRAMStartAdd
(SYSCR3),0x06
(SYSCR4),0xD4
(FLSCR1),0x50
(FLSCR2),0xD5
A,0xD5
C,0x00
(.BTGetRP)
A,0xFF
NZ,sSKIP
A,0xD5
Page 340
; Write data to the flash memory
; Sector Erase
; Chip Erase
; Check the status of the security program
; Enable the security program
; RAM start address
; Transfer the program from sRAMprogStart to
; sRAMprogEnd to cRAMStartAdd.
; Set INTUNDEF and INTSWI interrupt vectors
; Set INTWDT interrupt vector
; Set RAREA and RVCTR to "1"
; Enable Code
; Set BAREA to "1" (note 2)
; Reflect the FLSCR1 setting
; Enable Code
; Set 0x00 (note 1)
; Check the status of the security program
; Go to sSKIP if the security program is enabled
; Enable Code
TMP89FS60