m28529-12 Mindspeed Technologies, m28529-12 Datasheet - Page 300

• Manufacturer Part Number: m28529-12
• Description: Inverse Multiplexing For Atm Ima Family
• Manufacturer: Mindspeed Technologies

Table 4-6.
Table 4-7.
28529-DSH-001-K
IIO.42
IIO.43
IIO.44
IIO.45
IIO.46
IIO.47
IIO.48
IIO.49
IIO.50
IIO.51
Item
Item
IFS.1
IFS.2
IFS.3
IFS.4
IFS.5
IFS.6
When running the group start-up procedure, does the implementation wait a
minimum of one second, unless all the configured links are being reported
Tx=Usable by FE, before reporting links Rx=Active?
When running the group start-up procedure, does the implementation wait a
minimum of one second, unless all the configured links are being reported
Rx=Active by FE, before reporting links Tx=Active?
Does the implementation synchronize the insertion of new links or
recovered links added using the slow recovery mechanism, defined in
Section 12.1.3.1 on page 74, within the IMA RR?
Does the implementation execute only one LASR procedure per IMA group
at any time (even if more than one link is inserted at the same time)?
Does the implementation delay the insertion of one or more new links or a
possible slow link recovery when the LASR is in progress until the link
addition procedure is completed or aborted?
When running the LASR procedure, does the implementation ensure that all
the inserted links have their states changed to Tx=Usable in the same update
of the ICP?
When running the LASR procedure and after the Tx state of all accepted
links has been reported Usable in a previous update of the ICP cell, does the
implementation ensure that all the inserted links have their states changed
to Rx=Active in the same update of the ICP cell?
When running the LASR procedure and after the Rx state of all accepted
links has been reported Active in a previous update of the ICP cell, does the
implementation ensure that all the inserted links have their states changed
to Tx=Active in the same update of the ICP cell?
When running the LASR procedure, does the implementation wait a
minimum of one second, unless all the inserted links are being reported
Tx=Usable by FE, before reporting links Rx=Active?
When running the LASR procedure, does the implementation wait a
minimum of one second, unless the inserted links are being reported
Rx=Active by FE, before reporting links Tx=Active?
Does the implementation perform IMA frame synchronization on each link,
Does the implementation operate the IFSM for each link independently of
Does the implementation support the default value 2 for Alpha(α)?
Does the implementation support the default value 2 for Beta(β)?
Does the implementation support the default value 1 for Gamma(γ)?
Does the implementation support the value 1 for Alpha(α)?
based on the IFSM defined in Figure 19 on page 69 and Table 16 on page
69?
any link defects and link delay compensation?
IMA Interface Operation (IIO) Functions (4 of 4)
IMA Frame Synchronization (IFS) Mechanism Functions (1 of 2)
Protocol feature
Protocol feature
Mindspeed Proprietary and Confidential
Mindspeed Technologies
®
Cond. for
Cond. for
Status
Status
Status
Status
Pred.
Pred.
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
O
(R-100)
(R-101)
(R-102)
(R-103)
(R-104)
(R-105)
(R-106)
(R-107)
(R-108)
(R-109)
(R-110)
(R-111)
(R-112)
(R-112)
(R-112)
(O-16)
Ref.
Ref.
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Yes X No__
Appendices
Support
Support
285