h8s-2635 Renesas Electronics Corporation., h8s-2635 Datasheet - Page 182

• Manufacturer Part Number: h8s-2635
• Description: Renesas 16-bit Single-chip Microcomputer H8s Family/h8s/2600 Series
• Manufacturer: Renesas Electronics Corporation.

Section 5 Interrupt Controller
(1) Interrupt Acceptance Control
In interrupt control mode 0, interrupt acceptance is controlled by the I bit in CCR.
Table 5-6 shows the interrupts selected in each interrupt control mode.
Table 5-6
Interrupt Control Mode
0
2
Legend:
*: Don't care
(2) 8-Level Control
In interrupt control mode 2, 8-level mask level determination is performed for the selected
interrupts in interrupt acceptance control according to the interrupt priority level (IPR).
The interrupt source selected is the interrupt with the highest priority level, and whose priority
level set in IPR is higher than the mask level.
Table 5-7
Rev. 6.00 Feb 22, 2005 page 122 of 1484
REJ09B0103-0600
Interrupt Control Mode
0
2
Interrupts Selected in Each Interrupt Control Mode (1)
Interrupts Selected in Each Interrupt Control Mode (2)
Selected Interrupts
All interrupts
Highest-priority-level (IPR) interrupt whose priority level is greater
than the mask level (IPR > I2 to I0).
Interrupt Mask Bits
I
0
1
*
Selected Interrupts
All interrupts
NMI interrupts
All interrupts