h8s-2635 Renesas Electronics Corporation., h8s-2635 Datasheet - Page 427

no-image

h8s-2635

Manufacturer Part Number
h8s-2635
Description
Renesas 16-bit Single-chip Microcomputer H8s Family/h8s/2600 Series
Manufacturer
Renesas Electronics Corporation.
Datasheet
10.5
10.5.1
There are three kinds of TPU interrupt source: TGR input capture/compare match, TCNT
overflow, and TCNT underflow. Each interrupt source has its own status flag and enable/disabled
bit, allowing generation of interrupt request signals to be enabled or disabled individually.
When an interrupt request is generated, the corresponding status flag in TSR is set to 1. If the
corresponding enable/disable bit in TIER is set to 1 at this time, an interrupt is requested. The
interrupt request is cleared by clearing the status flag to 0.
Relative channel priorities can be changed by the interrupt controller, but the priority order within
a channel is fixed. For details, see section 5, Interrupt Controller.
Table 10-13 lists the TPU interrupt sources.
Interrupts
Interrupt Sources and Priorities
Rev. 6.00 Feb 22, 2005 page 367 of 1484
Section 10 16-Bit Timer Pulse Unit (TPU)
REJ09B0103-0600

Related parts for h8s-2635