h8s-2635 Renesas Electronics Corporation., h8s-2635 Datasheet - Page 96

• Manufacturer Part Number: h8s-2635
• Description: Renesas 16-bit Single-chip Microcomputer H8s Family/h8s/2600 Series
• Manufacturer: Renesas Electronics Corporation.

Section 2 CPU
General register ER7 has the function of stack pointer (SP) in addition to its general-register
function, and is used implicitly in exception handling and subroutine calls. Figure 2-9 shows the
stack.
Free area
SP (ER7)
Stack area
Figure 2-9 Stack
2.4.3
Control Registers
The control registers are the 24-bit program counter (PC), 8-bit extended control register (EXR),
8-bit condition-code register (CCR), and 64-bit multiply-accumulate register (MAC).
(1) Program Counter (PC)
This 24-bit counter indicates the address of the next instruction the CPU will execute. The length
of all CPU instructions is 2 bytes (one word), so the least significant PC bit is ignored (When an
instruction is fetched, the least significant PC bit is regarded as 0).
(2) Extended Control Register (EXR)
This 8-bit register contains the trace bit (T) and three interrupt mask bits (I2 to I0).
Bit 7—Trace Bit (T): Selects trace mode. When this bit is cleared to 0, instructions are executed
in sequence. When this bit is set to 1, a trace exception is generated each time an instruction is
executed.
Bits 6 to 3—Reserved: These bits are reserved. They are always read as 1.
Rev. 6.00 Feb 22, 2005 page 36 of 1484
REJ09B0103-0600