MCHC908MR8VFAE Freescale Semiconductor, MCHC908MR8VFAE Datasheet - Page 299

• Manufacturer Part Number: MCHC908MR8VFAE
• Description: IC MCU 8K FLASH 8MHZ PWM 32-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MCHC908MR8VFAE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 16
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 32-LQFP
• Processor Series: HC08MR
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 33
• Number Of Timers: 4
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: FSICEBASE, M68CBL05CE
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

MC68HC908MR8 — Rev 4.1
Freescale Semiconductor
NOTE:
The external interrupt pins are falling-edge-triggered and are
software-configurable to be both falling-edge and low-level-triggered.
The MODE1 bit in the ISCR controls the triggering sensitivity of the IRQ
pin.
When the interrupt pin is edge-triggered only, the interrupt latch remains
set until a vector fetch, software clear, or reset occurs.
When the interrupt pin is both falling-edge and low-level-triggered, the
interrupt latch remains set until both of these occur:
The vector fetch or software clear can occur before or after the interrupt
pin returns to logic 1. As long as the pin is low, the interrupt request
remains pending.
When set, the IMASK1 bit in the ISCR mask all external interrupt
requests. A latched interrupt request is not presented to the interrupt
priority logic unless the IMASK bit is clear.
The interrupt mask (I) in the condition code register (CCR) masks all
interrupt requests, including external interrupt requests.
See
•
•
Figure
Vector fetch, software clear, or reset
Return of the interrupt pin to logic 1
16-3.
External Interrupt (IRQ)
External Interrupt (IRQ)
Functional Description
Technical Data
299