UPSD3433E-40U6 STMicroelectronics, UPSD3433E-40U6 Datasheet - Page 57

• Manufacturer Part Number: UPSD3433E-40U6
• Description: MCU 8BIT 8032 128KB FLASH 80TQFP
• Manufacturer: STMicroelectronics
• Series: µPSDr

Specifications of UPSD3433E-40U6

• Core Processor: 8032
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, IrDA, SPI, UART/USART, USB
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 46
• Program Memory Size: 160KB (160K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TQFP, 80-VQFP
• For Use With: 497-5518 - EVAL BOARD RFID READER497-5218 - KIT DEVELOPMENT FOR UPSD3400497-2381 - CABLE PROGRAMMER FLASH LINK
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Other names: 497-4907

UPSD3422, UPSD3433, UPSD3434, UPSD3454
11
11.1
Dual data pointers
XDATA is accessed by the External Direct addressing mode, which uses a 16-bit address
stored in the DPTR register. Traditional 8032 architecture has only one DPTR register. This
is a burden when transferring data between two XDATA locations because it requires heavy
use of the working registers to manipulate the source and destination pointers.
However, the UPSD34xx has two data pointers, one for storing a source address and the
other for storing a destination address. These pointers can be configured to automatically
increment or decrement after each data transfer, further reducing the burden on the 8032
and making this kind of data movement very efficient.
Data pointer control register, DPTC (85h)
By default, the DPTR register of the UPSD34xx will behave no different than in a standard
8032 MCU. The DPSEL0 Bit of SFR register DPTC shown in
the two “background” data pointer registers (DPTR0 or DPTR1) will function as the
traditional DPTR register at any given time. After reset, the DPSEL0 Bit is cleared, enabling
DPTR0 to function as the DPTR, and firmware may access DPTR0 by reading or writing the
traditional DPTR register at SFR addresses 82h and 83h. When the DPSEL0 bit is set, then
the DPTR1 register functions as DPTR, and firmware may now access DPTR1 through SFR
registers at 82h and 83h. The pointer which is not selected by the DPSEL0 bit remains in
the background and is not accessible by the 8032. If the DPSEL0 bit is never set, then the
UPSD34xx will behave like a traditional 8032 having only one DPTR register.
To further speed XDATA to XDATA transfers, the SFR bit, AT, may be set to automatically
toggle the two data pointers, DPTR0 and DPTR1, each time the standard DPTR register is
accessed by a MOVX instruction. This eliminates the need for firmware to manually
manipulate the DPSEL0 bit between each data transfer.
Detailed description for the SFR register DPTC is shown in
Table 13.
Table 14.
Bit 7
5-1
Bit
–
7
6
0
DPTC: data pointer control register (SFR 85h, reset value 00h)
DPTC register bit definition
Symbol
DPSE0
Bit 6
AT
AT
–
–
Bit 5
R/W
R,W
R,W
–
–
–
Reserved
0 = Manually select data pointer
1 = Auto toggle between DPTR0 and DPTR1
Reserved
0 = DPTR0 selected for use as DPTR
1 = DPTR1 selected for use as DPTR
Bit 4
–
Bit 3
–
Definition
Table
Bit 2
Table
–
13.
13, selects which one of
Dual data pointers
Bit 1
–
DPSEL0
Bit 0
57/300