MPC564CZP40 Freescale Semiconductor, MPC564CZP40 Datasheet - Page 94

• Manufacturer Part Number: MPC564CZP40
• Description: IC MPU 32BIT W/CODE COMP 388PBGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564CZP40

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 40MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 388-BGA
• Processor Series: MPC5xx
• Core: PowerPC
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: CAN, JTAG, QSPI, SCI, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 56
• Number Of Timers: 2
• Operating Supply Voltage: 0 V to 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (10 bit, 32 Channel)
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No

Overview
1.6
1-10
•
•
•
•
•
•
•
•
The MPC561/MPC563 devices are very similar to the MPC555 with the following differences:
— Up to 66 MHz operating frequency (Refer to the applicable electrical characteristics document
— CDR3 technology
— Two power supplies: 5.0-V I/O, 2.6-V external bus signals, 2.6-V internal logic
— New modules: READI, CALRAM, PPM
— Extra TouCAN module, additional 6 Kbytes of SRAM on L-bus (32 Kbytes total) with
QADC64E
— GPO on all channel signals in addition to GPI functions
TouCAN, TPU3, QSMCM, UIMB, Core, L2U
— No changes
BBC2
— Enhanced interrupt controller support
— Enhanced exception relocation table
— Branch target buffer
— 2 Kbytes of decompression RAM for code compression. This may also be used as
CALRAM (with overlay features)
— New module
— Overlay features allow calibration of Flash-based constants
UC3F (U-bus CDR3 Flash module) on MPC563/MPC564 only
— 512 Kbytes of non-volatile memory (NVM)
— Designed for use in embedded microcontroller (MCU) applications targeted for high speed
READI
— New module
USIU
— Enhanced interrupt controller
— ENGCLK default frequency
DPTRAM
TouCAN
Module
TPU3
Additional MPC561/MPC563 Differences
PPM
for more information.)
CALRAM overlay features, extra 2 Kbytes of DPTRAM (8 Kbytes total)
general-purpose RAM while not used for code compression.
read performance and high density byte count requirements
Table 1-2. Differences Between MPC555 and MPC561/MPC563 (continued)
MPC561/MPC563 Reference Manual, Rev. 1.2
MPC555
—
(6 Kbytes) Identical (8 Kbytes)
(2) Identical (3)
(2) Identical (2)
MPC561/MPC563
New Module
Freescale Semiconductor