IPR-PCIE/1 Altera, IPR-PCIE/1 Datasheet - Page 287

• Manufacturer Part Number: IPR-PCIE/1
• Description: IP CORE Renewal Of IP-PCIE/1
• Manufacturer: Altera
• Type: MegaCorer

Specifications of IPR-PCIE/1

• Software Application: IP CORE, Interface And Protocols, PCI
• Supported Families: Arria GX, Cyclone II, HardCopy II, Stratix II
• Core Architecture: FPGA
• Core Sub-architecture: Arria, Cyclone, Stratix
• Rohs Compliant: NA
• Function: PCI Express Compiler, x1 Link Width
• License: Renewal License
• Lead Free Status / RoHS Status: na
• Lead Free Status / RoHS Status: na

Chapter 16: SOPC Builder Design Example
Run SOPC Builder
Run SOPC Builder
December 2010 Altera Corporation
f
1
1
4. In the Directory, Name, Top-Level Entity page, enter the following information:
The Quartus II software specifies a top-level design entity that has the same name as
the project automatically. Do not change this name.
Click Yes, if prompted, to create a new directory.
5. Click Next to display the Add Files page.
6. If you have any non-default libraries, add them by following these steps:
7. Click Next to display the Family & Device Settings page.
8. On the Family & Device Settings page, choose the following target device family
9. Click Next to close this page and display the EDA Tool Settings page.
10. Click Next to display the Summary page.
11. Check the Summary page to ensure that you have entered all the information
12. Click Finish to complete the Quartus II project.
To launch the PCI Express parameter editor in SOPC Builder, follow these steps:
1. On the Tools menu, click SOPC Builder. SOPC Builder appears.
Refer to
how to use SOPC Builder.
2. In the System Name box, type pcie_top, select Verilog under Target HDL, and
a. Specify the working directory for your project. This design example uses the
b. Specify the name of the project. This design example uses pcie_top. You must
a. Click User Libraries.
b. Type <path>\ip in the Library name box, where <path> is the directory in
c. Click Add to add the path to the Quartus II project.
d. Click OK to save the library path in the project.
and options:
a. In the Family list, select Stratix IV GT, GX, E.
1
b. In the Target device box, select Auto device selected by the Fitter.
correctly.
click OK.
directory \sopc_pcie.
specify the same name for both the project and the top-level design entity.
which you installed the PCI Express Compiler.
Volume 4: SOPC Builder
This design example creates a design targeting the Stratix IV GX device
family. You can also use these procedures for other supported device
families.
of the Quartus II Handbook for more information on
PCI Express Compiler User Guide
16–3