PIC16F716-I/P Microchip Technology Inc., PIC16F716-I/P Datasheet - Page 17

• Manufacturer Part Number: PIC16F716-I/P
• Description: 18 PIN, 3.5 KB FLASH, 128 RAM, 13 I/O
• Manufacturer: Microchip Technology Inc.

Specifications of PIC16F716-I/P

• A/d Inputs: 4-Channel, 8-Bit
• Cpu Speed: 5 MIPS
• Eeprom Memory: 0 Bytes
• Input Output: 13
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 18-pin PDIP
• Programmable Memory: 3.5K Bytes
• Ram Size: 128 Bytes
• Speed: 20 MHz
• Timers: 2-8-bit, 1-16-bit
• Voltage, Range: 2-5.5 V
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

2.2.2.5
This register contains the individual flag bits for the
peripheral interrupts.
REGISTER 2-5:
 2003 Microchip Technology Inc.
bit 7
bit 6
bit 5-3
bit 2
bit 1
bit 0
PIR1 Register
PIR1 REGISTER (ADDRESS: 0Ch)
bit 7
Unimplemented: Read as ‘0’
ADIF: A/D Converter Interrupt Flag bit
1 = An A/D conversion completed (must be cleared in software)
0 = The A/D conversion is not complete
Unimplemented: Read as ‘0’
CCP1IF: CCP1 Interrupt Flag bit
Capture Mode
1 = A TMR1 register capture occurred (must be cleared in software)
0 = No TMR1 register capture occurred
Compare Mode
1 = A TMR1 register compare match occurred (must be cleared in software)
0 = No TMR1 register compare match occurred
PWM Mode
Unused in this mode
TMR2IF: TMR2 to PR2 Match Interrupt Flag bit
1 = TMR2 to PR2 match occurred (must be cleared in software)
0 = No TMR2 to PR2 match occurred
TMR1IF: TMR1 Overflow Interrupt Flag bit
1 = TMR1 register overflowed (must be cleared in software)
0 = TMR1 register did not overflow
Legend:
R = Readable bit
-n = Value at POR
U-0
—
R/W-0
ADIF
U-0
Preliminary
—
W = Writable bit
‘1’ = Bit is set
U-0
—
Note:
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
Interrupt flag bits get set when an interrupt
condition occurs, regardless of the state of
its corresponding enable bit or the global
enable bit, GIE (INTCON<7>). User
software should ensure the appropriate
interrupt flag bits are clear prior to
enabling an interrupt.
U-0
—
CCP1IF
R/W-0
PIC16F716
x = Bit is unknown
TMR2IF
R/W-0
DS41206A-page 15
TMR1IF
R/W-0
bit 0