PIC16F716-I/P Microchip Technology Inc., PIC16F716-I/P Datasheet - Page 18

• Manufacturer Part Number: PIC16F716-I/P
• Description: 18 PIN, 3.5 KB FLASH, 128 RAM, 13 I/O
• Manufacturer: Microchip Technology Inc.

Specifications of PIC16F716-I/P

• A/d Inputs: 4-Channel, 8-Bit
• Cpu Speed: 5 MIPS
• Eeprom Memory: 0 Bytes
• Input Output: 13
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 18-pin PDIP
• Programmable Memory: 3.5K Bytes
• Ram Size: 128 Bytes
• Speed: 20 MHz
• Timers: 2-8-bit, 1-16-bit
• Voltage, Range: 2-5.5 V
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

PIC16F716
2.2.2.6
The Power Control (PCON) register contains a flag bit
to allow differentiation between a Power-on Reset
(POR) to an external MCLR Reset or WDT Reset.
These devices contain an additional bit to differentiate
a Brown-out Reset condition from a Power-on Reset
condition.
REGISTER 2-6:
DS41206A-page 16
bit 7-2
bit 1
bit 0
PCON Register
PCON REGISTER (ADDRESS: 8Eh)
bit 7
Unimplemented: Read as ‘0’
POR: Power-on Reset Status bit
1 = No Power-on Reset occurred
0 = A Power-on Reset occurred (must be set in software after a Power-on Reset occurs)
BOR: Brown-out Reset Status bit
1 = No Brown-out Reset occurred
0 = A Brown-out Reset occurred (must be set in software after a Brown-out Reset occurs)
Legend:
R = Readable bit
-n = Value at POR
U-0
—
U-0
—
U-0
Preliminary
—
q = Depends on condition
W = Writable bit
‘1’ = Bit is set
U-0
—
Note:
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
If the BOREN configuration bit is clear,
BOR is unknown on Power-on Reset.
If the BOREN configuration bit is set, BOR
is ‘1’ on Power-on Reset and reset to ‘0’
when a Brown-out condition occurs. BOR
must then be set by the user and checked
on subsequent resets to see if it is clear,
indicating that another Brown-out has
occurred.
U-0
—
 2003 Microchip Technology Inc.
U-0
—
x = Bit is unknown
R/W-0
POR
R/W-q
BOR
bit 0