PIC18F6621-I/PT Microchip Technology Inc., PIC18F6621-I/PT Datasheet - Page 167

• Manufacturer Part Number: PIC18F6621-I/PT
• Description: 64 PIN, 64 KB FLASH, 3840 RAM, 52 I/O
• Manufacturer: Microchip Technology Inc.

Specifications of PIC18F6621-I/PT

• A/d Inputs: 12-Channel, 10-Bit
• Comparators: 2
• Cpu Speed: 10 MIPS
• Eeprom Memory: 1024 Bytes
• Input Output: 54
• Interface: I2C/SPI/UART/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 64-pin TQFP
• Programmable Memory: 64K Bytes
• Ram Size: 3.8K Bytes
• Speed: 40 MHz
• Timers: 2-8-bit, 3-16-bit
• Voltage, Range: 2-5.5 V
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

17.4.5
In Full-Bridge Output mode, four pins are used as
outputs; however, only two outputs are active at a time.
In the Forward mode, pin P1A is continuously active
and pin P1D is modulated. In the Reverse mode, pin
P1C is continuously active and pin P1B is modulated.
These are illustrated in Figure 17-6.
FIGURE 17-6:
 2005 Microchip Technology Inc.
Forward Mode
Reverse Mode
Note 1: At this time, the TMR2 register is equal to the PR2 register.
Note
FULL-BRIDGE MODE
2: Output signal is shown as active-high.
P1A
P1B
P1C
P1D
P1A
P1B
P1C
P1D
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
FULL-BRIDGE PWM OUTPUT
(1)
(1)
Duty Cycle
Duty Cycle
PIC18F6525/6621/8525/8621
Period
Period
P1A, P1B, P1C and P1D outputs are multiplexed with
the PORTC<2>, PORTE<6:5> and PORTG<4> data
latches. The TRISC<2>, TRISC<6:5> and TRISG<4>
bits must be cleared to make the P1A, P1B, P1C and
P1D pins outputs.
(1)
(1)
DS39612B-page 165