S9S12XS256J0CAL Freescale Semiconductor, S9S12XS256J0CAL Datasheet - Page 440

• Manufacturer Part Number: S9S12XS256J0CAL
• Description: MCU 256K FLASH 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of S9S12XS256J0CAL

• Core Processor: HCS12X
• Core Size: 16-Bit
• Speed: 40MHz
• Connectivity: CAN, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 91
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 8K x 8
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 1.72 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• Processor Series: S12XS
• Core: HCS12
• Data Bus Width: 16 bit
• Data Ram Size: 12 KB
• Interface Type: CAN, SCI, SPI
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 91
• Number Of Timers: 12
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: DEMO9S12XSFAME, EVB9S12XEP100
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 16 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Serial Peripheral Interface (S12SPIV5)
15.3.2.2
Read: Anytime
Write: Anytime; writes to the reserved bits have no effect
440
Module Base +0x0001
Reset
LSBFE
SSOE
Field
1
0
W
R
Slave Select Output Enable — The SS output feature is enabled only in master mode, if MODFEN is set, by
asserting the SSOE as shown in
progress and force the SPI system into idle state.
LSB-First Enable — This bit does not affect the position of the MSB and LSB in the data register. Reads and
writes of the data register always have the MSB in the highest bit position. In master mode, a change of this bit
will abort a transmission in progress and force the SPI system into idle state.
0 Data is transferred most significant bit first.
1 Data is transferred least significant bit first.
SPI Control Register 2 (SPICR2)
0
0
7
MODFEN
= Unimplemented or Reserved
0
0
1
1
XFRW
0
6
Table 15-2. SPICR1 Field Descriptions (continued)
SSOE
Figure 15-4. SPI Control Register 2 (SPICR2)
0
1
0
1
Table 15-3. SS Input / Output Selection
S12XS Family Reference Manual, Rev. 1.11
0
0
5
Table
SS input with MODF feature
15-3. In master mode, a change of this bit will abort a transmission in
SS is slave select output
MODFEN
SS not used by SPI
SS not used by SPI
Master Mode
0
4
Description
BIDIROE
0
3
0
0
2
Slave Mode
SS input
SS input
SS input
SS input
SPISWAI
Freescale Semiconductor
0
1
SPC0
0
0