HD64F3337YCP16V Renesas Electronics America, HD64F3337YCP16V Datasheet - Page 422

• Manufacturer Part Number: HD64F3337YCP16V
• Description: MCU 3/5V 60K PB-FREE 84-PLCC
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300r

Specifications of HD64F3337YCP16V

• Core Size: 8-Bit
• Program Memory Size: 60KB (60K x 8)
• Oscillator Type: Internal
• Core Processor: H8/300
• Speed: 16MHz
• Connectivity: Host Interface, I²C, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 74
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 84-PLCC
• No. Of I/o's: 74
• Ram Memory Size: 1KB
• Cpu Speed: 16MHz
• No. Of Timers: 6
• No. Of Pwm Channels: 2
• Digital Ic Case Style: PLCC
• Controller Family/series: H8/300
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

19.3.2
User Programming Mode
When set to user programming mode, the H8/3334YF can erase and program its flash memory by
executing a user program. On-board updates of the on-chip flash memory can be carried out by
providing on-board circuits for supplying V
and data, and storing an update program in part of
PP
the program area.
To select user programming mode, select a mode that enables the on-chip ROM (mode 2 or 3) and
apply 12 V to the FV
pin, either during a reset, or after the reset has ended (been released) but
PP
while flash memory is not being accessed. In user programming mode, the on-chip supporting
modules operate as they normally would in mode 2 or 3, except for the flash memory. However,
hardware standby mode cannot be set while 12 V is applied to the FV
pin.
PP
The flash memory cannot be read while it is being programmed or erased, so the update program
must either be stored in external memory, or transferred temporarily to the RAM area and
executed in RAM.
390