WM8352GEB/V Wolfson Microelectronics, WM8352GEB/V Datasheet - Page 246

• Manufacturer Part Number: WM8352GEB/V
• Description: Audio CODECs Audio CODEC plus pwr management
• Manufacturer: Wolfson Microelectronics

Specifications of WM8352GEB/V

• Number Of Adc Inputs: 2
• Number Of Dac Outputs: 2
• Conversion Rate: 48 KSPS
• Interface Type: Serial (2-Wire, 3-Wire, 4-Wire)
• Resolution: 12 bit
• Operating Supply Voltage: 3.7 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: BGA
• Minimum Operating Temperature: - 25 C
• Number Of Channels: 2 ADC/2 DAC
• Supply Current: 260 uA
• Thd Plus Noise: - 83 dB
• Audio Codec Type: Stereo
• No. Of Adcs: 2
• No. Of Dacs: 2
• No. Of Input Channels: 8
• No. Of Output Channels: 6
• Adc / Dac Resolution: 24bit
• Adcs / Dacs Signal To Noise Ratio: 95dB
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

WM8352
REGISTER
Register 30h DAC Control
Register 32h DAC Digital Volume L
w
DAC Control
REGISTER
ADDRESS
ADDRESS
DAC Digital
R48 (30h)
R50 (32h)
Volume L
BIT
BIT
5:4
13
12
7:0
3
1
0
15
8
DAC_SDMCLK_RATE
DACL_VOL[7:0]
AIF_LRCLKRATE
DACR_DATINV
DACL_ENA
DACL_DATINV
DAC_VU
DAC_MONO
LABEL
DEEMP[1:0]
LABEL
DEFAULT
1100_0000 Left DAC digital volume control:
DEFAULT
0
0
00
0
0
0
0
0
Left DAC enable
0 = disabled
1 = enabled
DAC left and DAC right volume do not update until a
1 is written to either DAC_VU register bit.
0000_0000 = Digital mute
0000_0001 = -71.625dB
0000_0010 = -71.25dB
… (0.375dB steps)
1100_000 = 0dB
Adds left and right channel and halves the
resulting output to create a mono output
Mode Select
1 = USB mode (272 * Fs)
0 = Normal mode (256 * Fs)
DAC De-emphasis filter control
00 = No de-emphasis
01 = 32kHz sample rate
10 = 44.1kHz sample rate
11 = 48kHz sample rate
DAC_SDMCLK_RATE allows the DAC SDM to
be run at a speed higher than 64*fs. This is used
for low sample rate modes to allow the SDM to
run fast enough to shape the noise so that none
of it appears in the audio band. On the previous
version, at 8k sample rate you could hear some
high frequency noise when playing back through
a decent system.
DAC data left channel polarity
0 = Normal
1 = Inverted
DAC data right channel polarity
0 = Normal
1 = Inverted
DESCRIPTION
DESCRIPTION
PD, March 2010, Rev 4.2
REFER TO
REFER TO
Production Data
246