WM8352GEB/V Wolfson Microelectronics, WM8352GEB/V Datasheet - Page 327

• Manufacturer Part Number: WM8352GEB/V
• Description: Audio CODECs Audio CODEC plus pwr management
• Manufacturer: Wolfson Microelectronics

Specifications of WM8352GEB/V

• Number Of Adc Inputs: 2
• Number Of Dac Outputs: 2
• Conversion Rate: 48 KSPS
• Interface Type: Serial (2-Wire, 3-Wire, 4-Wire)
• Resolution: 12 bit
• Operating Supply Voltage: 3.7 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: BGA
• Minimum Operating Temperature: - 25 C
• Number Of Channels: 2 ADC/2 DAC
• Supply Current: 260 uA
• Thd Plus Noise: - 83 dB
• Audio Codec Type: Stereo
• No. Of Adcs: 2
• No. Of Dacs: 2
• No. Of Input Channels: 8
• No. Of Output Channels: 6
• Adc / Dac Resolution: 24bit
• Adcs / Dacs Signal To Noise Ratio: 95dB
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Production Data
w
When selecting a suitable output inductor, the inductance value and the saturation current must be
compatible with the operating conditions of the converter.
The magnitude of the inductor current ripple is dependant on the inductor value and can be
determined by the following equation:
As a minimum requirement, the DC current rating should be equal to the maximum load current plus
one half of the inductor current ripple:
To be suitable for the application, the chosen inductor must have a saturation current that is higher
than the peak inductor current given by the above equation. To maximise the converter efficiency,
the inductor should also have a low DC Resistance (DCR), resulting in minimum conduction losses.
Care should also be taken to ensure that the inductor is effective at the applicable operating
temperature.
Wolfson recommends the following external components for use with DC-DC Converters 1 and 6.
Note that the choice of output capacitor should be determined as described above.
Table 156 Recommended External Components - DC-DC1 and DC-DC6
Wolfson recommends the following external components for use with DC-DC Converters 3 and 4.
Table 157 Recommended External Components - DC-DC3 and DC-DC4
COMPONENT
COMPONENT
C
C
C
C
OUT
OUT
L
L
IN
IN
VALUE
VALUE
100μF
2.2μH
2.2μH
4.7μF
4.7μF
10μF
22μF
47μF
10μF
Murata LQM31PN2R2M00 (0.9A)
Murata GRM219R60J106KE19B
Murata GRM188R60J475KE19D
Murata GRM219R60J106KE19B
Murata GRM188R60J475KE19D
Coilcraft LPS3010-222ML (1.4A)
Murata GRM31CR60J476M
Murata GRM31CR60J107M
Murata GRM21BR60J226M
PART NUMBER
PART NUMBER
PD, March 2010, Rev 4.2
WM8352
SIZE
0805
0805
1206
1206
0603
SIZE
1206
0805
0603
327