WM8352GEB/V Wolfson Microelectronics, WM8352GEB/V Datasheet - Page 64

• Manufacturer Part Number: WM8352GEB/V
• Description: Audio CODECs Audio CODEC plus pwr management
• Manufacturer: Wolfson Microelectronics

Specifications of WM8352GEB/V

• Number Of Adc Inputs: 2
• Number Of Dac Outputs: 2
• Conversion Rate: 48 KSPS
• Interface Type: Serial (2-Wire, 3-Wire, 4-Wire)
• Resolution: 12 bit
• Operating Supply Voltage: 3.7 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: BGA
• Minimum Operating Temperature: - 25 C
• Number Of Channels: 2 ADC/2 DAC
• Supply Current: 260 uA
• Thd Plus Noise: - 83 dB
• Audio Codec Type: Stereo
• No. Of Adcs: 2
• No. Of Dacs: 2
• No. Of Input Channels: 8
• No. Of Output Channels: 6
• Adc / Dac Resolution: 24bit
• Adcs / Dacs Signal To Noise Ratio: 95dB
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

WM8352
13.4 INPUT SIGNAL PATH
w
The WM8352 has multiple analogue inputs. There are two input channels, Left and Right, each of
which consists of an input PGA stage followed by a boost/mix stage switch into the hi-fi ADC. Each
input PGA path has three input pins which can be configured in a variety of ways to accommodate
single-ended, differential or dual differential microphones. There are two auxiliary input pins which
can be fed into to the input boost/mix stage as well as driving into the output path. A bypass path
exists from the output of the boost/mix stage into the output left/right mixers.
13.4.1
The microphone inputs of the WM8352 are designed to accommodate electret condenser
microphones or analogue line-in signals. They comprise the following pins:
The non-inverting inputs have constant input impedance to VMID, whereas the inverting input’s
impedance varies with the pre-amplifier’s gain. (Note: the terms “inverting” and “non-inverting” refer
to the microphone pre-amplifiers only. For overall behaviour, the inverting record mixer and the ADC,
whose output can optionally be inverted in the digital domain, must also be taken into account.)
Each
pseudo-differentially connected microphones. The amplified signal for each channel can be digitised
in the audio ADC and/or mixed into the output signal path.
Figure 37 Microphone Inputs and Pre-amplifiers






channel
MICROPHONE INPUTS
IN1LP: first non-inverting input, left channel
IN2L: second non-inverting input, left channel
IN1LN: inverting input, left channel
IN1RP: first non-inverting input, right channel
IN2R: second non-inverting input, right channel
IN1RN: inverting input, right channel
has
a
programmable
pre-amplifier,
which
supports
PD, March 2010, Rev 4.2
single-ended
Production Data
64
or