XE8805AMI028LF Semtech, XE8805AMI028LF Datasheet - Page 114

• Manufacturer Part Number: XE8805AMI028LF
• Description: IC DAS 16BIT FLASH 8K MTP 64LQFP
• Manufacturer: Semtech

Specifications of XE8805AMI028LF

• Applications: Sensing Machine
• Core Processor: RISC
• Program Memory Type: FLASH (22 kB)
• Controller Series: XE8000
• Ram Size: 512 x 8
• Interface: UART, USRT
• Number Of I /o: 24
• Voltage - Supply: 2.4 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 64-LQFP
• Supply Voltage Range: 2.4V To 5.5V
• Operating Temperature Range: -40°C To +85°C
• Digital Ic Case Style: LQFP
• No. Of Pins: 64
• For Use With: XE8000MP - PROG BOARD AND PROSTART2 CARD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Offset error is defined as the output code error for a zero volt input (ideally, output code = 0). The offset of the ADC
and the PGA1 stage are completely suppressed if N
The measured offset drift vs. temperature curves for different PGA gains are depicted in Figure 16-20. The output
offset error, expressed in LSB for 16-bit setting, is normalized to 25°C. Notice that if the ADC is used alone, the
output offset error is below ±1 LSB and has no drift.
16.8.6
Figure 16-21 plots the variation of quiescent current consumption with supply voltage V
distribution between the 3 PGA stages and the ADC (see Table 16-28). As shown in Figure 16-22, if lower
sampling frequency is used, the quiescent current consumption can be lowered by reducing the bias currents of the
PGAs and the ADC with registers IB_AMP_PGA
IB_AMP_PGA/ADC[1:0] = '11', '10', '00' for f
Quiescent current consumption vs. temperature is depicted in Figure 16-23, showing a relative increase of nearly
40% between -45 and +85°C. Figure 16-24 shows the variation of quiescent current consumption for different
frequency settings of the internal RC oscillator. It can be seen that the quiescent current varies by about 20%
between 100kHz and 2MHz.
© Semtech 2006
Power Consumption
Figure 16-20. Offset error vs. temperature for different PGA gains
Figure 16-19. Gain error vs. temperature for different PGA gains
-0.1
-0.2
-0.3
-0.4
100
0.2
0.1
0.0
-20
-40
80
60
40
20
0
-50
-50
S
= 500, 250, 62.5kHz respectively.)
NORMALIZED TO 25°C
-25
NORMALIZED TO 25°C
-25
ELCONV
Temperature [°C]
Temperature [°C]
0
0
16-28
[1:0] and IB_AMP_ADC
> 1.
25
25
50
50
75
75
1
5
20
100
1
5
20
100
100
100
[1:0]. (In Figure 16-22,
XE8805/05A
DD
, as well as the
www.semtech.com