XE8805AMI028LF Semtech, XE8805AMI028LF Datasheet - Page 80

• Manufacturer Part Number: XE8805AMI028LF
• Description: IC DAS 16BIT FLASH 8K MTP 64LQFP
• Manufacturer: Semtech

Specifications of XE8805AMI028LF

• Applications: Sensing Machine
• Core Processor: RISC
• Program Memory Type: FLASH (22 kB)
• Controller Series: XE8000
• Ram Size: 512 x 8
• Interface: UART, USRT
• Number Of I /o: 24
• Voltage - Supply: 2.4 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 64-LQFP
• Supply Voltage Range: 2.4V To 5.5V
• Operating Temperature Range: -40°C To +85°C
• Digital Ic Case Style: LQFP
• No. Of Pins: 64
• For Use With: XE8000MP - PROG BOARD AND PROSTART2 CARD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

14.8 Software hints
Example of program for a transmission with polling:
1. The RegUartCmd register and the RegUartCtrl register are initialized (for example: 8 bit word length, odd
2. Write a byte to RegUartTx.
3. Wait until the UartTxFull bit in RegUartTxSta register equals 0.
4. Jump to 2 to write the next byte if the message is not finished.
5. End of transmission.
Example of program for a transmission with interrupt:
1. The RegUartCmd register and the RegUartCtrl register are initialized (for example: 8 bit word length, odd
2. Write a byte to RegUartTx.
3. After an interrupt and if the message is not finished, jump to 2
4. End of transmission.
Example of program for a reception with polling:
1. The RegUartCmd register and the RegUartCtrl register are initialized (for example: 8 bit word length, odd
2. Wait until the UartRxFull bit in the RegUartRxSta register equals 1.
3. Read the RegUartRxSta and check if there is no error.
4. Read data in RegUartRx.
5. If data is not equal to End-Of-Line, then jump to 2.
6. End of reception.
Example of program for a reception with interrupt:
1. The RegUartCmd register and the RegUartCtrl register are initialized (for example: 8 bit word length, odd
2. When there is an interrupt, jump to 3
3. Read RegUartRxSta and check if there is no error.
4. Read data in RegUartRx.
5. If data is not equal to End-Of-Line, then jump to 2.
6. End of reception.
© Semtech 2006
parity, 9600 baud, enable Uart transmission).
parity, 9600 baud, enable Uart transmission).
parity, 9600 baud, enable Uart reception).
parity, 9600 baud, enable Uart reception).
14-7
XE8805/05A
www.semtech.com