XE8805AMI028LF Semtech, XE8805AMI028LF Datasheet - Page 50

• Manufacturer Part Number: XE8805AMI028LF
• Description: IC DAS 16BIT FLASH 8K MTP 64LQFP
• Manufacturer: Semtech

Specifications of XE8805AMI028LF

• Applications: Sensing Machine
• Core Processor: RISC
• Program Memory Type: FLASH (22 kB)
• Controller Series: XE8000
• Ram Size: 512 x 8
• Interface: UART, USRT
• Number Of I /o: 24
• Voltage - Supply: 2.4 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 64-LQFP
• Supply Voltage Range: 2.4V To 5.5V
• Operating Temperature Range: -40°C To +85°C
• Digital Ic Case Style: LQFP
• No. Of Pins: 64
• For Use With: XE8000MP - PROG BOARD AND PROSTART2 CARD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7.8 Prescalers
The clock generator block embeds two divider chains: the high prescaler and the low prescaler.
The high prescaler is made of an 8 stage dividing chain and the low prescaler of a 15 stage dividing chain.
Features:
7.9 32 kHz frequency selector
A decoder is used to select from the high prescaler the frequency tap that is the closest to 32 kHz to operate the
low prescaler when the Xtal is not running. In this case, the RC oscillator frequency of ±50% will also be valid for
the low prescaler frequency outputs.
© Semtech 2006
•
•
•
•
High prescaler can only be driven with RC clock (bit EnableRc have to be set, see Table 7-12).
Low prescaler can be driven from the high prescaler or directly with the Xtal clock when bit EnableXtal is set to
Bit ResPre in the RegSysPre0 register allows to reset synchronously the low prescaler, the low prescaler is
Bit ColdXtal=1 indicates the Xtal is in its start up phase. It is active for 37268 Xtal cycles after setting
1, bit EnExtClock is set to 0 and ExtClk is equal at 0.
also automatically cleared when bit EnableXtal is set. Both dividing chains are reset asynchronously by the
resetsleep signal.
EnableXtal.
7-9
XE8805/05A
www.semtech.com