XE8805AMI028LF Semtech, XE8805AMI028LF Datasheet - Page 79

• Manufacturer Part Number: XE8805AMI028LF
• Description: IC DAS 16BIT FLASH 8K MTP 64LQFP
• Manufacturer: Semtech

Specifications of XE8805AMI028LF

• Applications: Sensing Machine
• Core Processor: RISC
• Program Memory Type: FLASH (22 kB)
• Controller Series: XE8000
• Ram Size: 512 x 8
• Interface: UART, USRT
• Number Of I /o: 24
• Voltage - Supply: 2.4 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 64-LQFP
• Supply Voltage Range: 2.4V To 5.5V
• Operating Temperature Range: -40°C To +85°C
• Digital Ic Case Style: LQFP
• No. Of Pins: 64
• For Use With: XE8000MP - PROG BOARD AND PROSTART2 CARD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

and an interrupt is generated on Irq_uart_Rx. This indicates that new data is available in RegUartRx. The timing
diagram is shown in Figure 14-2.
The UartRxFull bit is cleared when RegUartRx is read. If the register was not read before the receiver transfers a
new word to it, the bit UartRxOErr (overflow error) is set and the previous contents of the register is lost.
UartRxOErr is cleared by writing any data to RegUartRxSta.
The bit UartRxSErr is set if a start error has been detected. The bit is updated at data transfer to RegUartRx.
The bit UartRxPErr is set if a parity error has been detected, i.e. the received parity bit is not equal to the
calculated parity of the received data. The bit is updated at data transfer to RegUartRx.
The bit UartRxFErr in RegUartRxSta shows that a frame error has been detected. No stop bit has been detected.
Figure 14-2. Uart reception timing diagram.
14.7 Interrupt or polling
The transmission and reception software can be driven by interruption or by polling the status bits.
Interrupt driven reception: each time an Irq_uart_Rx interrupt is generated, a new word is available in RegUartRx.
The register has to be read before a new word is received.
Interrupt driven transmission: each time the contents of RegUartTx is transferred to the transmission shift register,
an Irq_uart_Tx interrupt is generated. A new word can then be written to RegUartTx.
Reception driven by polling: the UartRxFull bit is to be read and checked. When it is 1, the RegUartRx register
contains new data and has to be read before a new word is received.
Transmission driven by polling: the UartTxFull bit is to read and checked. When it is 0, the RegUartTx register is
empty and a new word can be written to it.
© Semtech 2006
Asynchronous Reception
read of RegUartRx (software)
reguartrx_shift
UartRxBusy
RegUartRx
Irq_uart_Rx
UartRxFull
shift clock
Rx
start
b0
14-6
b6/7
parity
stop
word 1
word 1
XE8805/05A
www.semtech.com