MC68HC908AZ32ACFU MOTOROLA [Motorola, Inc], MC68HC908AZ32ACFU Datasheet - Page 158

no-image

MC68HC908AZ32ACFU

Manufacturer Part Number
MC68HC908AZ32ACFU
Description
Microcontrollers
Manufacturer
MOTOROLA [Motorola, Inc]
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MC68HC908AZ32ACFU
Manufacturer:
FREESCALE
Quantity:
90
Part Number:
MC68HC908AZ32ACFU
Manufacturer:
FREESCALE
Quantity:
90
Clock Generator Module (CGM)
8.10.2 Parametric Influences on Reaction Time
Advance Information
158
Obviously, the acquisition and lock times can vary according to how
large the frequency error is and may be shorter or longer in many cases.
Acquisition and lock times are designed to be as short as possible while
still providing the highest possible stability. These reaction times are not
constant, however. Many factors directly and indirectly affect the
acquisition time.
The most critical parameter which affects the reaction times of the PLL
is the reference frequency, f
page 138). This frequency is the input to the phase detector and controls
how often the PLL makes corrections. For stability, the corrections must
be small compared to the desired frequency, so several corrections are
required to reduce the frequency error. Therefore, the slower the
reference the longer it takes to make these corrections. This parameter
is also under user control via the choice of crystal frequency f
Another critical parameter is the external filter capacitor. The PLL
modifies the voltage on the VCO by adding or subtracting charge from
this capacitor. Therefore, the rate at which the voltage changes for a
given frequency error (thus a change in charge) is proportional to the
capacitor size. The size of the capacitor also is related to the stability of
the PLL. If the capacitor is too small, the PLL cannot make small enough
adjustments to the voltage and the system cannot lock. If the capacitor
is too large, the PLL may not be able to adjust the voltage in a
reasonable time. See
Also important is the operating voltage potential applied to V
power supply potential alters the characteristics of the PLL. A fixed value
is best. Variable supplies, such as batteries, are acceptable if they vary
within a known range at very slow speeds. Noise on the power supply is
not acceptable, because it causes small frequency errors which
continually change the acquisition time of the PLL.
Freescale Semiconductor, Inc.
For More Information On This Product,
expires when the LOCK bit becomes set in the PLL bandwidth
control register (PBWC). (See
Bandwidth Modes
Clock Generator Module (CGM)
Go to: www.freescale.com
Choosing a Filter Capacitor
on page 141).
CGMRDV
Manual and Automatic PLL
(please reference
68HC908AZ32A — Rev 0.0
on page 159.
Figure 8-1
DDA
MOTOROLA
CGMXCLK
. The
on
.

Related parts for MC68HC908AZ32ACFU