MC68HC908AZ32ACFU MOTOROLA [Motorola, Inc], MC68HC908AZ32ACFU Datasheet - Page 408

• Manufacturer Part Number: MC68HC908AZ32ACFU
• Description: Microcontrollers
• Manufacturer: MOTOROLA [Motorola, Inc]

MSCAN Controller (MSCAN08)
Advance Information
408
NOTE:
MSCAN08 is in buss-off state, it stops counting the 128*11 consecutive
recessive bits due to the stopped clocks. The TxCAN pin stays in
recessive state. If RXF=1, the message can be read and RXF can be
cleared. Copying of RxGB into RxFG doesn’t take place while in Sleep
mode. It is possible to access the transmit buffers and to clear the TXE
flags. No message abort takes place while in Sleep mode.
The MSCAN08 leaves Sleep mode (wake-up) when:
The MCU cannot clear the SLPRQ bit before the MSCAN08 is in Sleep
mode (SLPAK=1).
After wake-up, the MSCAN08 waits for 11 consecutive recessive bits to
synchronize to the bus. As a consequence, if the MSCAN08 is woken-
up by a CAN frame, this frame is not received. The receive message
buffers (RxFG and RxBG) contain messages if they were received
before Sleep mode was entered. All pending actions are executed upon
Freescale Semiconductor, Inc.
•
•
•
For More Information On This Product,
bus activity occurs or
the MCU clears the SLPRQ bit or
the MCU sets the SFTRES bit
or MSCAN08
Figure 24-6. Sleep Request/Acknowledge Cycle
MSCAN Controller (MSCAN08)
MCU
Go to: www.freescale.com
MSCAN08 Sleeping
SLPRQ = 1
SLPAK = 1
MSCAN08 Running
SLPRQ = 0
SLPAK = 0
MSCAN08
Sleep Request
SLPRQ = 1
SLPAK = 0
68HC908AZ32A — Rev 0.0
MCU
MOTOROLA