MPC8544COMEDEV Freescale Semiconductor, MPC8544COMEDEV Datasheet - Page 882

• Manufacturer Part Number: MPC8544COMEDEV
• Description: KIT DEV EXPRESS MPC8544COM
• Manufacturer: Freescale Semiconductor
• Type: MPUr

Specifications of MPC8544COMEDEV

• Contents: Board
• For Use With/related Products: MPC8544
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Enhanced Three-Speed Ethernet Controllers
If the CRC hash table index selects a bit that is set in the hash table, the frame is accepted. If 32 group
addresses are stored in the hash table and random group addresses are received, the extended hash table
prevents roughly 480/512 (93.8%) of the group address frames from reaching memory. Software must
further filter those that reach memory to determine if they contain the correct addresses. Alternatively,
small multicast groups can be held in the exact match MAC address registers, which guarantees that only
correct frames are admitted.
The effectiveness of the hash table declines as the number of addresses increases. For instance, as the
number of addresses stored in the 512-bin hash table increases, the vast majority of the hash table bits are
set, preventing only a small fraction of frames from reaching memory.
15-150
/* Wrapper macros for 256-bucket and 512-bucket hash tables:
#define TSEC_HASH256(macaddr) ((crc32(macaddr) >> 24) & 0xff)
#define TSEC_HASH512(macaddr) ((crc32(macaddr) >> 23) & 0x1ff)
/* CRC constants.
#define CRC_POLYNOMIAL 0xedb88320
#define CRC_INITIAL
#define MAC_ADDRLEN
#define BITS_PER_BYTE
/* crc32() Takes the array of bytes, macaddr[], representing an
unsigned long crc32(unsigned char macaddr[MAC_ADDRLEN])
{
}
*/
unsigned long crc, result;
int byte, i;
/* CRC-32 algorithm starts by inverting first 4 bytes */
crc = CRC_INITIAL;
/* add each byte to running CRC accumulator */
for (byte = 0; byte < MAC_ADDRLEN; ++byte) {
}
/* finally, reverse bits of result to get CRC in normal bit order */
for (result = 0, i = 4*BITS_PER_BYTE-1; i >= 0; crc >>= 1, --i)
return result;
Pass 6-byte Ethernet MAC address as parameter. */
Ethernet MAC address and returns the CRC-32 result over these bytes,
where each byte is used in bit-reversed form (Ethernet bit order).
Index 0 of macaddr[] is the first byte of the address on the wire.
Test case: the result of crc32 on {0x00, 0x01, 0x02, 0x03, 0x04, 0x05}
should be 0xad0c28f3.
crc ^= macaddr[byte];
/* shift CRC right to perform but reversal on byte of address */
for (i = 0; i < BITS_PER_BYTE; ++i)
result |= (crc & 1) << i;
crc = (crc >> 1) ^ CRC_POLYNOMIAL;
crc >>= 1;
if (crc & 1)
else
MPC8544E PowerQUICC III Integrated Host Processor Family Reference Manual, Rev. 1
Figure 15-128. Sample C Code for Computing eTSEC Hash Table Indices
Note: CRC-32 polynomial is bit-reversed. */
0xffffffff
6
8
Freescale Semiconductor