C8051T611-GM Silicon Laboratories Inc, C8051T611-GM Datasheet - Page 49

• Manufacturer Part Number: C8051T611-GM
• Description: IC 8051 MCU 16K BYTE-PROG 28-QFN
• Manufacturer: Silicon Laboratories Inc
• Series: C8051T61xr

Specifications of C8051T611-GM

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: POR, PWM, Temp Sensor, WDT
• Number Of I /o: 25
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: OTP
• Ram Size: 1.25K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 17x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-QFN
• Processor Series: C8051T6x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 1.25 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 29
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051FT610DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 21 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 336-1436-5

8.5. ADC0 Analog Multiplexer (C8051T610/1/2/3/6 only)
ADC0 on the C8051T610/1/2/3/6 uses an analog input multiplexer to select the positive input to the ADC.
Any of the following may be selected as the positive input: Port 1, 2 and 3 I/O pins, the on-chip temperature
sensor, or the positive power supply (V
described in SFR Definition 8.9.
Important Note About ADC0 Input Configuration: Port pins selected as ADC0 inputs should be config-
ured as analog inputs, and should be skipped by the Digital Crossbar. To configure a Port pin for analog
input, set to 0 the corresponding bit in register PnMDIN. To force the Crossbar to skip a Port pin, set to 1
the corresponding bit in register PnSKIP. See Section “21. Port Input/Output” on page 113 for more Port
I/O configuration details.
Note: Not all pins exist on all
packages. See the AMX0P
selection table for details on
which pins are available for
selection.
Sensor
Temp
Figure 8.6. ADC0 Multiplexer Block Diagram
P1.0
P3.4
VDD
DD
). The ADC0 input channel is selected in the AMX0P register
AMX0P
Rev 1.0
AMUX
C8051T610/1/2/3/4/5/6/7
ADC0
49