C8051T611-GM Silicon Laboratories Inc, C8051T611-GM Datasheet - Page 59

• Manufacturer Part Number: C8051T611-GM
• Description: IC 8051 MCU 16K BYTE-PROG 28-QFN
• Manufacturer: Silicon Laboratories Inc
• Series: C8051T61xr

Specifications of C8051T611-GM

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: POR, PWM, Temp Sensor, WDT
• Number Of I /o: 25
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: OTP
• Ram Size: 1.25K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 17x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-QFN
• Processor Series: C8051T6x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 1.25 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 29
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051FT610DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 21 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 336-1436-5

The Comparator output can be polled in software, used as an interrupt source, and/or routed to a Port pin.
When routed to a Port pin, the Comparator output is available asynchronous or synchronous to the system
clock; the asynchronous output is available even in STOP mode (with no system clock active). When dis-
abled, the Comparator output (if assigned to a Port I/O pin via the Crossbar) defaults to the logic low state,
and the power supply to the comparator is turned off. See Section “21.3. Priority Crossbar Decoder” on
page 117 for details on configuring Comparator outputs via the digital Crossbar. Comparator inputs can be
externally driven from –0.25 V to (V
trical specifications are given in Section “7. Electrical Characteristics” on page 31.
The Comparator response time may be configured in software via the CPTnMD registers (see SFR Defini-
tion 12.2 and SFR Definition 12.4). Selecting a longer response time reduces the Comparator supply cur-
rent.
Comparator
Input Mux
Figure 12.2. Comparator1 Functional Block Diagram
CPT1MD
CP1 +
CP1 -
DD
+
-
) + 0.25 V without damage or upset. The complete Comparator elec-
CPT1CN
VDD
GND
CP1RIF
CP1FIF
Rev 1.0
(SYNCHRONIZER)
D
SET
CLR
Q
Q
C8051T610/1/2/3/4/5/6/7
0
1
0
1
D
SET
CLR
Q
Q
CP1EN
Crossbar
0
1
EA
0
1
CP1A
Interrupt
CP1
CP1
59