MCR908JK1ECPE Freescale Semiconductor, MCR908JK1ECPE Datasheet - Page 53

• Manufacturer Part Number: MCR908JK1ECPE
• Description: IC MCU 1.5K FLASH 8MHZ 20-DIP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MCR908JK1ECPE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Peripherals: LED, LVD, POR, PWM
• Number Of I /o: 14
• Program Memory Size: 1.5KB (1.5K x 8)
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.3 V
• Data Converters: A/D 12x8b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-DIP (0.300", 7.62mm)
• Processor Series: HC08JK
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Development Tools By Supplier: FSICEBASE, DEMO908JL16E, M68CBL05CE
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 12 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

The COP reset is asynchronous to the bus clock.
The active reset feature allows the part to issue a reset to peripherals and other chips within a system
built around the MCU.
5.3.2.1 Power-On Reset
When power is first applied to the MCU, the power-on reset module (POR) generates a pulse to indicate
that power-on has occurred. The external reset pin (RST) is held low while the SIM counter counts out
4096 2OSCOUT cycles. Sixty-four 2OSCOUT cycles later, the CPU and memories are released from
reset to allow the reset vector sequence to occur.
At power-on, the following events occur:
Freescale Semiconductor
•
•
•
•
•
•
A POR pulse is generated.
The internal reset signal is asserted.
The SIM enables the oscillator to drive 2OSCOUT.
Internal clocks to the CPU and modules are held inactive for 4096 2OSCOUT cycles to allow
stabilization of the oscillator.
The RST pin is driven low during the oscillator stabilization time.
The POR bit of the reset status register (RSR) is set and all other bits in the register are cleared.
2OSCOUT
IRST
RST
IAB
ILLEGAL ADDRESS RST
ILLEGAL OPCODE RST
Figure 5-6. Sources of Internal Reset
RST PULLED LOW BY MCU
MC68HC908JL3E Family Data Sheet, Rev. 4
Figure 5-5. Internal Reset Timing
COPRST
32 CYCLES
POR
LVI
INTERNAL RESET
32 CYCLES
VECTOR HIGH
Reset and System Initialization
53