MC9S08DZ60MLC Freescale Semiconductor, MC9S08DZ60MLC Datasheet - Page 391

• Manufacturer Part Number: MC9S08DZ60MLC
• Description: IC MCU 60K FLASH 4K RAM 32-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS08r

Specifications of MC9S08DZ60MLC

• Core Processor: HCS08
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: CAN, I²C, LIN, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 10x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 32-LQFP
• For Use With: DEMO9S08DZ60 - BOARD DEMOEVB9S08DZ60 - BOARD EVAL FOR 9S08DZ60
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Appendix B
Timer Pulse-Width Modulator (TPMV2)
The TPM uses one input/output (I/O) pin per channel, TPMxCHn where x is the TPM number (for
example, 1 or 2) and n is the channel number (for example, 0–4). The TPM shares its I/O pins with
general-purpose I/O port pins (refer to the
B.0.1
The TPM has the following features:
B.0.2
Figure B-1
of channels.
Freescale Semiconductor
•
•
•
•
•
•
•
•
•
Each TPM may be configured for buffered, center-aligned pulse-width modulation (CPWM) on all
channels
Clock sources independently selectable per TPM (multiple TPMs device)
Selectable clock sources (device dependent): bus clock, fixed system clock, external pin
Clock prescaler taps for divide by 1, 2, 4, 8, 16, 32, 64, or 128
16-bit free-running or up/down (CPWM) count operation
16-bit modulus register to control counter range
Timer system enable
One interrupt per channel plus a terminal count interrupt for each TPM module (multiple TPMs
device)
Channel features:
— Each channel may be input capture, output compare, or buffered edge-aligned PWM
— Rising-edge, falling-edge, or any-edge input capture trigger
— Set, clear, or toggle output compare action
— Selectable polarity on PWM outputs
shows the structure of a TPM. Some MCUs include more than one TPM, with various numbers
Features
Block Diagram
This chapter refers to S08TPM version 2, which applies to the 3M05C and
older mask sets of this device. )M74K and newer mask set devices use
S08TPM version 3. If your device uses mask 0M74K or newer, please refer
to
information pertaining to that module.
Chapter 16, “Timer Pulse-Width Modulator (S08TPMV3)
MC9S08DZ60 Series Data Sheet, Rev. 4
Pins and Connections
NOTE
chapter for more information).
for
391