MC908LD64IFUE Freescale Semiconductor, MC908LD64IFUE Datasheet - Page 127

• Manufacturer Part Number: MC908LD64IFUE
• Description: IC MCU 8BIT FOR LCD 64-QFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC908LD64IFUE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 6MHz
• Connectivity: I²C, USB
• Peripherals: OSD, POR, PWM
• Number Of I /o: 39
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 6x8b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 64-QFP
• Processor Series: HC08LD
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: I2C, USB
• Maximum Clock Frequency: 6 MHz
• Number Of Programmable I/os: 39
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: FSICEBASE, M68CBL05CE
• Minimum Operating Temperature: 0 C
• On-chip Adc: 8 bit, 6 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

9.6.1.2 SWI Instruction
9.6.2 Interrupt Status Registers
MC68HC908LD64
Freescale Semiconductor
NOTE:
NOTE:
—
Rev. 3.0
The LDA opcode is pre-fetched by both the INT1 and INT2 RTI
instructions. However, in the case of the INT1 RTI pre-fetch, this is a
redundant operation.
To maintain compatibility with the M6805 Family, the H register is not
pushed on the stack during interrupt entry. If the interrupt service routine
modifies the H register or uses the indexed addressing mode, software
should save the H register and then restore it prior to exiting the routine.
The SWI instruction is a non-maskable instruction that causes an
interrupt regardless of the state of the interrupt mask (I bit) in the
condition code register.
A software interrupt pushes PC onto the stack. A software interrupt does
not push PC – 1, as a hardware interrupt does.
The flags in the interrupt status registers identify maskable interrupt
sources.
status register flags that they set. The interrupt status registers can be
useful for debugging.
Table 9-3
System Integration Module (SIM)
summarizes the interrupt sources and the interrupt
System Integration Module (SIM)
Exception Control
Data Sheet
127