MC908LD64IFUE Freescale Semiconductor, MC908LD64IFUE Datasheet - Page 208

• Manufacturer Part Number: MC908LD64IFUE
• Description: IC MCU 8BIT FOR LCD 64-QFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC908LD64IFUE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 6MHz
• Connectivity: I²C, USB
• Peripherals: OSD, POR, PWM
• Number Of I /o: 39
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 6x8b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 64-QFP
• Processor Series: HC08LD
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: I2C, USB
• Maximum Clock Frequency: 6 MHz
• Number Of Programmable I/os: 39
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: FSICEBASE, M68CBL05CE
• Minimum Operating Temperature: 0 C
• On-chip Adc: 8 bit, 6 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Universal Serial Bus Module (USB)
14.6.9 USB Hub Status Register (HSR)
Data Sheet
208
Address:
RSEQ — Hub Endpoint 0 Receive Sequence Bit
SETUP — Hub SETUP Token Detect Bit
TX1ST — Hub Transmit First Flag
TX1STR — Clear Hub Transmit First Flag
Reset:
Read:
Write:
This read-only bit indicates the type of data packet last received for
hub endpoint 0 (DATA0 or DATA1).
This read-only bit indicates that a valid SETUP token has been
received.
This read-only bit is set if the hub endpoint 0 data transmit flag (TXDF)
is set when the USB control logic is setting the hub endpoint 0 data
receive flag (RXDF). That is, TXDF is still set at the end of an
endpoint 0 reception. This bit allows the software to know that the
endpoint 0 transmission happened before the endpoint 0 reception.
Reset clears this bit.
Writing a logic 1 to this write-only bit will clear the TX1ST bit if it is set.
Reset clears this bit.
1 = DATA1 token received in last hub endpoint 0 receive
0 = DATA0 token received in last hub endpoint 0 receive
1 = Last token received for hub endpoint 0 was a SETUP token
0 = Last token received for hub endpoint 0 was not a SETUP token
1 = IN transaction occurred before SETUP/OUT
0 = IN transaction occurred after SETUP/OUT
1 = Write 1 to clear the TX1ST bit
0 = No effect
X = Indeterminate
$005D
RSEQ
Bit 7
Universal Serial Bus Module (USB)
X
Figure 14-11. USB Hub Status Register (HSR)
SETUP
6
X
TX1ST
5
X
= Unimplemented
TX1STR
4
0
0
RPSIZ3
3
X
MC68HC908LD64
RPSIZ2
Freescale Semiconductor
2
X
RPSIZ1
X
1
—
RPSIZ0
Rev. 3.0
Bit 0
X