UPD78F0386GK-8EU-A Renesas Electronics America, UPD78F0386GK-8EU-A Datasheet - Page 36

• Manufacturer Part Number: UPD78F0386GK-8EU-A
• Description: MCU 96KB FLASH 5KB RAM
• Manufacturer: Renesas Electronics America
• Series: 78K0/Lx2r

Specifications of UPD78F0386GK-8EU-A

• Core Processor: 78K/0
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: LCD, LVD, POR, PWM, WDT
• Number Of I /o: 26
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Ram Size: 5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -

2.2 Description of Pin Functions
2.2.1 P00, P01 (port 0)
(1) Port mode
(2) Control mode
2.2.2 P10 to P17 (port 1)
interface data I/O, clock I/O, and timer I/O.
(1) Port mode
(2) Control mode
34
P00 and P01 function as a 2-bit I/O port. These pins also function as timer I/O.
The following operation modes can be specified in 1-bit units.
P10 to P17 function as an 8-bit I/O port. These pins also function as pins for external interrupt request input, serial
The following operation modes can be specified in 1-bit units.
P00 and P01 function as a 2-bit I/O port. P00 and P01 can be set to input or output port in 1-bit units using port
mode register 0 (PM0). Use of an on-chip pull-up resistor can be specified by pull-up resistor option register 0
(PU0).
P00 and P01 function as timer I/O.
(a) TI000
(b) TI010
(c) TO00
P10 to P17 function as an 8-bit I/O port. P10 to P17 can be set to input or output port in 1-bit units using port
mode register 1 (PM1). Use of an on-chip pull-up resistor can be specified by pull-up resistor option register 1
(PU1).
P10 to P17 function as external interrupt request input, serial interface data I/O, clock I/O, and timer I/O.
(a) SI10
(b) SO10
(c) SCK10
This is the pin for inputting an external count clock to 16-bit timer/event counter 00 and is also for inputting a
capture trigger signal to the capture registers (CR000, CR010) of 16-bit timer/event counter 00.
This is the pin for inputting a capture trigger signal to the capture register (CR000) of 16-bit timer/event
counter 00.
This is timer output pin.
This is a serial interface serial data input pin.
This is a serial interface serial data output pin.
This is a serial interface serial clock I/O pin.
CHAPTER 2 PIN FUNCTIONS
User’s Manual U17504EJ2V0UD